| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19260451 B01 |
| Issuance Date |
2022-01-31 |
| Abatement Due Date |
2022-02-25 |
| Current Penalty |
2690.7 |
| Initial Penalty |
3729.0 |
| Final Order |
2022-02-28 |
| Nr Instances |
2 |
| Nr Exposed |
2 |
| Related Event Code (REC) |
Referral |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.451(b)(1): Each platform on all working levels of scaffolds was not fully planked or decked between the front uprights and the guardrail supports as specified in paragraphs 1926.451(b)(1)(i)-(ii) a) On August 5, 2021, an employee was using upper deck of tubular weld scaffold that was not fully planked. The planks did not come up to the guardrails exposing the employees to fall hazards of approximately 14 feet high. b) On August 5, 2021, an employee was using an A-frame horse scaffold with a single plank, approximately 3 to 4 feet above the ground. NOTE: Certification of corrective action is required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19260451 B02 |
| Issuance Date |
2022-01-31 |
| Abatement Due Date |
2022-02-25 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2022-02-28 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.451(b)(2): Scaffold platforms and walkways were not at least 18 inches wide: a) On August 5, 2021 an employee was using A-frame platform using a plank less than 18 inches wide exposing employee to fall hazards. NOTE: Certification of corrective action is required for this item. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19260451 G01 |
| Issuance Date |
2022-01-31 |
| Abatement Due Date |
2022-02-25 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2022-02-28 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Referral |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.451(g)(1): Employees on scaffolds more than 10 feet (3.1 m) above a lower level were not protected from falling to that lower level by fall protection established in paragraphs (g)(1)(i)-(vii) of this section: a) On August 5, 2021 an employee was using a tubular welded frame scaffolding missing end guardrails on both ends exposing the employee to fall hazards of approximately 14 feet. NOTE: Certification of corrective action is required for this item. |
|
| Citation ID |
01001D |
| Citaton Type |
Serious |
| Standard Cited |
19260454 A |
| Issuance Date |
2022-01-31 |
| Abatement Due Date |
2022-02-25 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2022-02-28 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Referral |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.454(a): The employer did not have each employee who performed work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used and to understand the procedures to control or minimize those hazards. a) On August 5, 2021 an untrained employee was using a tubular welded frame scaffolding exposing the employee to fall hazards of approximately 14 feet. NOTE: Certification of corrective action is required for this item. |
|
| Citation ID |
01002A |
| Citaton Type |
Serious |
| Standard Cited |
19260451 C02 I |
| Issuance Date |
2022-01-31 |
| Abatement Due Date |
2022-02-25 |
| Current Penalty |
1700.0 |
| Initial Penalty |
2486.0 |
| Final Order |
2022-02-28 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Referral |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.451(c)(2)(i): Footings were not level, sound, rigid and capable of supporting the loaded scaffold without settling or displacement: a) On August 5, 2021 an employee was using a tubular welded frame scaffolding with unstable footings on uneven dirt ground and placed next to a hole dug in the ground. NOTE: Certification of corrective action is required for this item. |
|
| Citation ID |
01002B |
| Citaton Type |
Serious |
| Standard Cited |
19260451 F07 |
| Issuance Date |
2022-01-31 |
| Abatement Due Date |
2022-02-25 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2022-02-28 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Referral |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.451(f)(7): Scaffolds were not erected, moved, dismantled, or altered, by trained and experienced employees under the supervision and direction of a competent person qualified: a) On August 5, 2021 tubular welded frame scaffolding was missing guardrails on both ends of scaffold, was not fully decked/planked, and footings were placed on unstable ground. NOTE: Certification of corrective action is required for this item. |
|
| Citation ID |
01002C |
| Citaton Type |
Serious |
| Standard Cited |
19260454 B |
| Issuance Date |
2022-01-31 |
| Abatement Due Date |
2022-02-25 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2022-02-28 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Referral |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.454(b): The employer did not have each employee who was involved in erecting, disassembling, moving, operating, repairing, maintaining, or inspecting a scaffold trained by a competent person to recognize any hazards associated with the work. a) On August 5, 2021, employees had not received adequate training on the appropriate erection of tubular welded scaffolding used for stucco installation. NOTE: Certification of corrective action is required for this item. |
|
| Citation ID |
01003A |
| Citaton Type |
Serious |
| Standard Cited |
19261053 B01 |
| Issuance Date |
2022-01-31 |
| Abatement Due Date |
2022-02-25 |
| Current Penalty |
1700.0 |
| Initial Penalty |
2486.0 |
| Final Order |
2022-02-28 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Referral |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.1053(b)(1): Where portable ladders were used for access to an upper landing surface and the ladder's length allows, the ladder side rails did not extend at least 3 feet (.9 m) above the upper landing surface being accessed: a) On August 5, 2021 an employee was using an unsecured ladder with no grab rail and not extending 3 feet above level when accessing a welded frame scaffold exposing the employee to fall hazards of approximately 14 feet. NOTE: Certification of corrective action is required for this item. |
|
| Citation ID |
01003B |
| Citaton Type |
Serious |
| Standard Cited |
19261060 A |
| Issuance Date |
2022-01-31 |
| Abatement Due Date |
2022-02-25 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2022-02-28 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Referral |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.1060(a): The employer did not provide a training program for each employee using ladders and stairways, as necessary, which would enable each employee to recognize hazards related to ladders and stairways and train each employee in the procedures to be followed to minimize these hazards. a) On August 5, 2021 an employee was not trained in the proper use of ladder usage exposing employee to fall hazards. NOTE: Certification of corrective action is required for this item. |
|
