Inspection Type |
Planned
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
2024-05-23
|
Emphasis |
L: FORKLIFT, N: FALL, P: FALL
|
Case Closed |
2024-08-19
|
Violation Items
Citation ID |
01001A |
Citaton Type |
Serious |
Standard Cited |
19260028 A |
Issuance Date |
2024-06-24 |
Abatement Due Date |
2024-07-19 |
Current Penalty |
3457.0 |
Initial Penalty |
3457.0 |
Final Order |
2024-07-22 |
Nr Instances |
1 |
Nr Exposed |
3 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.28(a): The employer did not require the wearing of appropriate personal protective equipment in all operations where there is an exposure to hazardous conditions: a) On or about May 23, 2024, and at times prior thereto employees used pneumatic nail guns during framing activities, without eye protection. Note: Certification of corrective action is required for this item. |
|
Citation ID |
01001B |
Citaton Type |
Serious |
Standard Cited |
19260100 A |
Issuance Date |
2024-06-24 |
Abatement Due Date |
2024-07-19 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2024-07-22 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.100(a):Employees working in areas where there is a possible danger of head injury from impact, or from falling or flying objects, or from electrical shock and burns, was not protected by protective helmets. a) On or about May 23, 2024, and at times prior thereto; an employee worked below other employees who were installing OSB sheathing onto the roof, 24 feet overhead. Note: Certification of corrective action is required for this item. |
|
Citation ID |
01002 |
Citaton Type |
Serious |
Standard Cited |
19260501 B10 |
Issuance Date |
2024-06-24 |
Abatement Due Date |
2024-07-19 |
Current Penalty |
4839.0 |
Initial Penalty |
4839.0 |
Final Order |
2024-07-22 |
Nr Instances |
1 |
Nr Exposed |
3 |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.501(b)(1): Each employee on a walking/working surface with an unprotected side or edge which was 6 feet (1.8 m) or more above a lower level was not protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems: a) On or about May 23, 2024 and at times prior thereto employees performed framing activities, which included roof sheathing, on a 2-12 pitched roof and were exposed to fall hazards of approximately 24 feet. Note: Abatement and Certification of corrective action ARE required for this item. |
|
Citation ID |
01003 |
Citaton Type |
Serious |
Standard Cited |
19260602 D |
Issuance Date |
2024-06-24 |
Abatement Due Date |
2024-07-19 |
Current Penalty |
4839.0 |
Initial Penalty |
4839.0 |
Final Order |
2024-07-22 |
Nr Instances |
1 |
Nr Exposed |
1 |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.602(d): Powered industrial truck operator training. The requirements applicable to construction work under this paragraph are identical to those set forth in 29 CFR 1910.178(l) 29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer did not ensure that each operator has successfully completed the training required by this paragraph (l): a) On or about May 23, 2024 and at times prior thereto; an employee operated a GEHL Dynalift rough terrain forklift. Note) Abatement and Certification of corrective action and documentation and documentation ARE required for this item. |
|
Citation ID |
01004 |
Citaton Type |
Serious |
Standard Cited |
19261053 B13 |
Issuance Date |
2024-06-24 |
Abatement Due Date |
2024-07-19 |
Current Penalty |
3457.0 |
Initial Penalty |
3457.0 |
Final Order |
2024-07-22 |
Nr Instances |
1 |
Nr Exposed |
4 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.1053(b)(13): The top or top step of a stepladder was used as a step: a) On May 23, 2024, employees used the top step of an 8-foot A-Frame ladder placed on the second story floor to get down from the rafters. Abatement Note: Abatement on-site |
|
|
Inspection Type |
Referral
|
Scope |
Partial
|
Safety/Health |
Safety
|
Close Conference |
2017-06-22
|
Case Closed |
2018-10-11
|
Related Activity
Type |
Referral |
Activity Nr |
1233699 |
Safety |
Yes |
|
Type |
Inspection |
Activity Nr |
1242630 |
Safety |
Yes |
|
Violation Items
Citation ID |
01001 |
Citaton Type |
Serious |
Standard Cited |
19260028 A |
Issuance Date |
2017-07-13 |
Abatement Due Date |
2017-08-08 |
Current Penalty |
1500.0 |
Initial Penalty |
2173.0 |
Final Order |
2017-08-03 |
Nr Instances |
1 |
Nr Exposed |
5 |
Gravity |
1 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.28(a): The employer did not require the wearing of appropriate personal protective equipment in all operations where there is an exposure to hazardous conditions: a) Jobsite: On June 22, 2017 and at times prior thereto employees performed framing activities which required the use of a nail guns and skillsaws; without eye protection. Note) Certification of corrective action is required for this item. |
|
Citation ID |
01002A |
Citaton Type |
Serious |
Standard Cited |
19260451 A06 |
Issuance Date |
2017-07-13 |
Abatement Due Date |
2017-08-08 |
Current Penalty |
3750.0 |
Initial Penalty |
5070.0 |
Final Order |
2017-08-03 |
Nr Instances |
3 |
Nr Exposed |
3 |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.451(a)(6): Scaffolds were not designed by a qualified person and were not constructed and loaded in accordance with that design: a) Jobsite: On June 22, 2017 and at times prior thereto employees performed framing activities from a scaffold platform that was supported by a rough terrain forklift. The scaffold platform was not designed and constructed by a qualified person in that the platform was not secured to the forklift. The employees were exposed to an approximate 18 foot fall to the ground below. b) Jobsite: On June 22, 2017 and at times prior thereto employees performed framing activities from a scaffold platform that was supported by a rough terrain forklift. The scaffold platform was not designed and constructed by a qualified person in that a guardrail system or other fall protection system was not in place. The employees were exposed to a 18 foot fall to the ground below. c) Jobsite: On June 22, 2017 and at times prior thereto employees performed framing activities from a scaffold platform that was supported by a rough terrain forklift. The scaffold platform was not designed and constructed by a qualified person in that the manufacturer warned of a personal injury hazard, prohibiting use of the machine as a personal lift, or to fit the machine with any form of personnel work platform. The employees were exposed to a 18 foot fall to the ground below. Note) Abatement and Certification of corrective action ARE required for this item. |
|
Citation ID |
01002B |
Citaton Type |
Serious |
Standard Cited |
19260451 G01 |
Issuance Date |
2017-07-13 |
Abatement Due Date |
2017-08-08 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2017-08-03 |
Nr Instances |
1 |
Nr Exposed |
3 |
Gravity |
5 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.451(g)(1): Each employee on a scaffold more than 10 feet (3.1 m) above a lower level was not protected from falling to that lower level: a) Jobsite: On June 22, 2017 and at times prior thereto employees performed framing activities from a scaffold platform that was supported by a rough terrain forklift. A guardrail system or other fall protection system was not in place. The employees were exposed to an approximate 18 foot fall to the ground below. Note) Abatement and Certification of corrective action ARE required for this item. |
|
Citation ID |
01002C |
Citaton Type |
Serious |
Standard Cited |
19260602 D |
Issuance Date |
2017-07-13 |
Abatement Due Date |
2017-08-08 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2017-08-03 |
Nr Instances |
1 |
Nr Exposed |
3 |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.602(d): Powered industrial truck operator training. The requirements applicable to construction work under this paragraph are identical to those set forth in 29 CFR 1910.178(l) 29 CFR 1910.178(l)(1)(ii): Prior to permitting an employee to operate a powered industrial truck (except for training purposes), the employer did not ensure that each operator has successfully completed the training required by this paragraph (l): a) Jobsite: On June 22, 2017 and at times prior thereto employees had not been provided with powered industrial truck (forklift) training from the employer to ensure the employees were familiar with truck related topics, workplace related topics, and safe operations. Employees operated a GEHL dynalift rough terrain forklift while performing framing activities. Note) Abatement and Certification of corrective action ARE required for this item. |
|
Citation ID |
01002D |
Citaton Type |
Serious |
Standard Cited |
19260454 A |
Issuance Date |
2017-07-13 |
Abatement Due Date |
2017-08-08 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2017-08-03 |
Nr Instances |
2 |
Nr Exposed |
3 |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.454(a): The employer did not have each employee who performs work while on a scaffold trained by a person qualified in the subject matter to recognize the hazards associated with the type of scaffold being used: a) Jobsite: On June 22, 2017 and at times prior thereto employees performed framing activities from a scaffold platform, supported by a rough terrain forklift, without a guardrail or other fall protection system in place. The employees did not recognize or acknowledge the hazard and take action that would control or minimize the hazard. b) Jobsite: On June 22, 2017 and at times prior thereto employees performed framing activities from a scaffold platform, supported by a rough terrain forklift. The platform was not securely attached to the forklift. The employees did not recognize or acknowledge the hazard and take action that would control or minimize the hazard. Note) Abatement and Certification of corrective action ARE required for this item. |
|
Citation ID |
01003A |
Citaton Type |
Serious |
Standard Cited |
19260501 B13 |
Issuance Date |
2017-07-13 |
Abatement Due Date |
2017-08-08 |
Current Penalty |
3750.0 |
Initial Penalty |
5070.0 |
Final Order |
2017-08-03 |
Nr Instances |
1 |
Nr Exposed |
6 |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.501(b)(13): Each employee engaged in residential construction activities 6 feet (1.8 m) or more above lower levels was not protected by guardrail systems, safety net system, or personal fall arrest system: a) Jobsite: On or about June 22, 2017 and at times prior thereto employees performed framing activities, which included roof sheathing, on a 5 1/2 in 12 pitched roof, without using a fall protection system in place on the balconies. Employees were exposed to fall hazards ranging approximately 9 feet up to 25 feet. Note) Abatement and Certification of corrective action ARE required for this item. |
|
Citation ID |
01003B |
Citaton Type |
Serious |
Standard Cited |
19260503 A02 III |
Issuance Date |
2017-07-13 |
Abatement Due Date |
2017-08-08 |
Current Penalty |
0.0 |
Initial Penalty |
0.0 |
Final Order |
2017-08-03 |
Nr Instances |
1 |
Nr Exposed |
6 |
Gravity |
10 |
FTA Current Penalty |
0.0 |
Citation text line |
29 CFR 1926.503(a)(2)(iii): The employer did not assure that each employee had been trained, as necessary, by a competent person qualified in the use and operation of guardrail systems, personal fall arrest systems, safety net systems, warning line systems, safety monitoring systems, controlled access zones, and other protection to be used: a) Jobsite: On or about June 22, 2107 and at times prior thereto employees performing framing activities on a 5 1/2 in 12 pitched roof did not recognize and/or acknowledge the hazard of working without a fall protection system in place on the balcony levels. The employees did not take action to minimize the hazard. Note) Abatement and Certification of corrective action ARE required for this item. |
|
|