| Inspection Type |
Complaint
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2014-01-09
|
| Emphasis |
L: FORKLIFT
|
| Case Closed |
2015-04-07
|
Related Activity
| Type |
Complaint |
| Activity Nr |
867174 |
| Safety |
Yes |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100022 A01 |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-06-10 |
| Current Penalty |
2975.0 |
| Initial Penalty |
2975.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
1 |
| Nr Exposed |
5 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, and service rooms were not kept clean and orderly and in a sanitary condition. a) Throughout the Resaw building: On January 9, 2014 and at times prior thereto, more than 5% of the total square footage of the floor and horizontal surfaces were covered in wood dust measuring 7/32 to 12/32 of an inch on horizontal surfaces exposing employees to fire and explosion hazards associated with combustible dust. Note: Abatement certification is required for this item. |
|
| Citation ID |
01002A |
| Citaton Type |
Serious |
| Standard Cited |
19100215 A04 |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-05-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
1785.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.215(a)(4): Work rest(s) on grinding machinery were not adjusted closely to the wheel with a maximum opening of one eighth inch: (a) In the Shop: On January 9, 2014 and at times prior thereto, the black bench grinder was missing the work rest. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01002B |
| Citaton Type |
Serious |
| Standard Cited |
19100215 B09 |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-05-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one fourth inch: (a) In the Shop: On January 9, 2014 and at times prior thereto, the black bench grinder was missing the tongue guard. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100219 F03 |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-06-10 |
| Current Penalty |
0.0 |
| Initial Penalty |
2975.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
3 |
| Nr Exposed |
4 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(f)(3): All sprocket wheels and chains were not enclosed unless they were more than seven (7) feet above the floor or platform. Where the drive extends over other machine or working areas, protection against falling were not provided: a) In the saw mill area: On or about January 9, 2014, and at times prior thereto, the pinch point at the sawmill in-feed was unguarded. b) In the saw mill area: On or about January 9, 2014, and at times prior thereto, pinch points at the carriage feed drive were unguarded. c) In the saw mill area: On or about January 9, 2014, and at times prior thereto, a pinch point at the drive motor/transmission was unguarded. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01004 |
| Citaton Type |
Other |
| Standard Cited |
19100265 E02 III C |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-06-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
2975.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.265(e)(2)(iii)(c): Upper saw(s) of double circular mill(s) were not provided with substantial hood or guard. A screen/ saw cover or other suitable device was not placed so as to protect the sawyer from flying particles: a) At sawmill: On or before January 9, 2014, and at times prior thereto, the operators cab was missing protective glass. Note: Abatement certification IS required for this item. |
|
| Citation ID |
02001 |
| Citaton Type |
Repeat |
| Standard Cited |
19100219 C04 I |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-06-03 |
| Current Penalty |
2800.0 |
| Initial Penalty |
5600.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
2 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(c)(4)(i): Projecting shaft ends did not present a smooth edge and end and projected more than one-half the diameter of the shaft and were not guarded by nonrotating caps or safety sleeves: a) In the saw mill area: On or about June 24, 2013, and at times prior thereto, shafts ends at the out-feed conveyor were unguarded. b) In the saw mill area: On or about June 24, 2013, and at times prior thereto, shaft ends on the Pacific Trails chain saw (Bunk saw) was unguarded and exceeded one half the diameter of the shaft. Note: Abatement certification and documentation ARE required for this item. Specialty Incorporated was previously cited for a violation of this occupational safety and health standard or its equivalent standard 29 CFR 1910.219(c)(4)(i) which was contained in OSHA inspection number 29646, citation number 01, item number 002 and was affirmed as a final order on 08/10/2011, with respect to a workplace located at 4323 Pioneer Rd. in Homedale, ID. 83628. |
|
| Citation ID |
03001 |
| Citaton Type |
Other |
| Standard Cited |
19100138 A |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-05-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
1 |
| Nr Exposed |
20 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.138(a): The employer did not select and require employee(s) to use appropriate hand protection when employees' hands were exposed to hazards such as those from skin absorption of harmful substances; severe cuts or lacerations; severe abrasion; punctures; chemical burns; thermal burns; and harmful temperature extremes: a) At the facility located in Homedale ID: On January 9,2014, the employer failed to select, provide and require employees to use appropriate hand protection when exposed to cuts and splinters when building wooden pallets. Note: Abatement certification IS required for this item. |
|
| Citation ID |
03002A |
| Citaton Type |
Other |
| Standard Cited |
19100147 C04 I |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-06-10 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
2 |
| Nr Exposed |
6 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented and utilized for the control of potentially hazardous energy when employees are engaged in the activities covered by this section: a) In the saw mill area: On January 9, 2014, and at times prior thereto, specific lock out tag out procedures were not developed, and implemented for tasks such as sharpening the 4 foot saw blade in place. Note: Abatement certification IS required for this item. |
|
| Citation ID |
03002B |
| Citaton Type |
Other |
| Standard Cited |
19100147 C06 II |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-06-10 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
1 |
| Nr Exposed |
6 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(6)(ii): The employer did not certify that the periodic inspections have been performed: a) On or before January 9, 2014, and at times prior thereto, the employer did not perform or certify that employees were following written lock out tag out procedures especially when; cleaning, adjusting, or changing blades on the jump saw; the Resaw; the trim saws; the saw mill and the notcher. Note: Abatement certification IS required for this item. |
|
| Citation ID |
03003A |
| Citaton Type |
Other |
| Standard Cited |
19100178 L03 I M |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-06-10 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
10 |
| Nr Exposed |
8 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(l)(3)(i)(M): The employer did not review the operating instructions, warnings, or precautions listed in the operator's manual for the types of vehicle that the employee is being trained to operate: a) At the yard in Homedale, ID: On or before January 9, 2014, Cat Dually Model GP25, S/N 5AM91400. b) At the yard in Homedale, ID: On or before January 9, 2014, Hyster Dually Model H70C. c) At the yard in Homedale, ID: On or before January 9, 2014, Hyster Dually Model H80C, S/N C5D10664P. d) At the yard in Homedale, ID: On or before January 9, 2014, Green Mitsubishi, Model PG15, S/N AF315-0373. e) At the yard in Homedale, ID: On or before January 9, 2014, Pettibone Mercury Model GA-70, S/N 65i6030. f) At the yard in Homedale, ID: On or before January 9, 2014, Cat Model GP15, S/N 3AM01169. g) At the yard in Homedale, ID: On or before January 9, 2014, Hyster EPV, Model H50H, S/N D003D 12039A. h) At the yard in Homedale, ID: On or before January 9, 2014, Cat V50DSA, Model V50DSA, S/N 2NC335. i) At the yard in Homedale, ID: On or before January 9, 2014, Hyster Challenger, Model H70C, S/N C5D 26006. j) At the yard in Homedale, ID: On or before January 9, 2014, Toyota, Model 7FGU25, S/N 82416. Note: Abatement certification IS required for this item. |
|
| Citation ID |
03003B |
| Citaton Type |
Other |
| Standard Cited |
19100178 L06 |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-05-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(l)(6): The certification did not include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation: a) At the office in Homedale, ID: On or before January 9, 2014, and at times prior thereto, the employer did not create or maintain a list/log of powered industrial (forklift) operators that included information required in the standard. Note: Abatement certification IS required for this item. |
|
| Citation ID |
03004 |
| Citaton Type |
Other |
| Standard Cited |
19100243 B02 |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-06-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
2 |
| Nr Exposed |
20 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.243(b)(2): Air hose and hose connections used for conducting compressed air to utilization equipment was not designed for the pressure and service to which they were subjected: a) In the Viking/Resaw building: On or before January 9, 2014, and at times prior thereto, the employer used black poly pipe for a compressed air system that was not rated for compressed air use. b) In the Viking/ Re-saw building: On or before January 9, 2014, and at times prior thereto, the employer used automotive type screw hose clamps for a compressed air system that was not rated for compressed air use. Note: Abatement certification IS required for this item. |
|
| Citation ID |
03005 |
| Citaton Type |
Other |
| Standard Cited |
19100305 G01 IV A |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-06-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
1 |
| Nr Exposed |
4 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and cables were used as a substitute for the fixed wiring of a structure; a) In the repackaging building: On or before January 9, 2014, and at times prior thereto, the employer used extension cords wound around rafters and posts to power two box fans for ventilation purposes. Note: Abatement certification IS required for this item. |
|
| Citation ID |
03006 |
| Citaton Type |
Other |
| Standard Cited |
19101200 E01 I |
| Issuance Date |
2014-05-14 |
| Abatement Due Date |
2014-06-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-06-09 |
| Nr Instances |
1 |
| Nr Exposed |
40 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(e)(1)(i): Employer did not develop, implement, and maintain a list of the hazardous chemicals known to be present using a product identifier that is referenced on the appropriate safety data sheet (the list may be compiled for the workplace as a whole or for individual work areas); a) On or before January 9, 2014, and at times prior thereto, the employer did not have a list of chemicals, found and used in the work place such as Weber stencil ink and Diatomaceous earth. Note: Abatement certification IS required for this item. |
|
|
