| Inspection Type |
Fat/Cat
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2019-12-19
|
| Case Closed |
2020-06-29
|
Related Activity
| Type |
Accident |
| Activity Nr |
1525589 |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19101200 E01 |
| Issuance Date |
2020-06-05 |
| Abatement Due Date |
2020-07-23 |
| Current Penalty |
800.0 |
| Initial Penalty |
1475.0 |
| Final Order |
2020-06-29 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: (a) Carpenters in the shop were not aware of a written hazard communication program for chemicals including dusts and solvents. Workers used lubricants, spray finishing, and cut and sanded natural woods (white oak, alder, and more), and manufactured wood products, such as melamine. Specific chemicals used included, but were not limited to flammable solvent-containing Lami-Lube-III, Bostik GlideCote, Famowood Wood Filler, and Rust-Oleum spray enamel. Note: Certification of corrective action is required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19101200 G08 |
| Issuance Date |
2020-06-05 |
| Abatement Due Date |
2020-07-23 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2020-06-29 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(g)(8): The employer did not maintain in the workplace copies of the required safety data sheets for each hazardous chemical: (a) Safety Data Sheets (SDS) were not available in the workplace for hazardous chemicals including, but not limited to flammable solvent containing Lami-Lube-III, Bostik GlideCote, Famowood Wood Filler, and Rust-Oleum spray enamel. NOTE: Certification of corrective action is required for this item. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19101200 H01 |
| Issuance Date |
2020-06-05 |
| Abatement Due Date |
2020-07-23 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2020-06-29 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: (a) Employees engaged in cabinet building had not received training on the hazardous chemicals in their workplace, including the hazards of the chemicals, how to recognize exposures, or the methods to protect themselves. Chemicals included, but were not limited to: dusts from natural wood; dusts and chemicals associated with manufactured wood products, such as Melamine; and flammable solvent containing chemicals such as Lami-Lube-III, Bostik GlideCote, Famowood Wood Filler, and Rust-Oleum spray enamel. NOTE: Certification of corrective action is required for this item. |
|
| Citation ID |
02001 |
| Citaton Type |
Repeat |
| Standard Cited |
19100022 A01 |
| Issuance Date |
2020-06-05 |
| Abatement Due Date |
2020-07-23 |
| Current Penalty |
216.0 |
| Initial Penalty |
216.0 |
| Final Order |
2020-06-29 |
| Nr Instances |
1 |
| Nr Exposed |
4 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(a)(1): All places of employment, passageways, storerooms, service rooms, and walking-working surfaces were not kept in a clean, orderly, and sanitary condition. (a) Accumulations of combustible wood dust had accumulated over a prolonged period, including but not limited to the storage above the restroom, other elevated surfaces, ledges, ductwork, and conduit. NOTE: Abatement certification AND supporting documentation are required for this item. Taft Design Works, Inc. was previously cited for a violation of this Occupational Safety and Health Standard 29 CFR 1910.22(a)(1):, which was contained in OSHA inspection number 1356940, citation number 1, item number 1, and was affirmed as a final order on January 3, 2019, with respect to a workplace located at 109 Honeysuckle Street, Bellevue, ID, 83313. |
|
| Citation ID |
03001 |
| Citaton Type |
Other |
| Standard Cited |
19100134 C02 I |
| Issuance Date |
2020-06-05 |
| Abatement Due Date |
2020-07-01 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2020-06-29 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: (a) Workers were provided and permitted to wear N95 filtering face piece respirators. The employer had not provided training or information to ensure workers understand the use and limitations of the these respirators. NOTE: Certification of corrective action is required for this item. |
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2018-11-01
|
| Emphasis |
N: AMPUTATE
|
| Case Closed |
2019-11-27
|
Related Activity
| Type |
Referral |
| Activity Nr |
1396654 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100022 A01 |
| Issuance Date |
2018-12-03 |
| Abatement Due Date |
2018-12-28 |
| Current Penalty |
831.5 |
| Initial Penalty |
1663.0 |
| Final Order |
2019-01-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Complaint |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.22(a)(1): The employer failed to provide a clean and sanitary condition for all places of employment, passageways, storerooms, service rooms, and walking-working surfaces. (a) Cabinet Shop: On or about November 1, 2018 and at times prior, employees were cutting and fabricating cabinets. Generated wood dust is not being cleaned-up to prevent build up. Note: Abatement certification is required for this item. |
|
| Citation ID |
01002A |
| Citaton Type |
Serious |
| Standard Cited |
19100178 L01 I |
| Issuance Date |
2018-12-03 |
| Abatement Due Date |
2018-12-28 |
| Current Penalty |
831.5 |
| Initial Penalty |
1663.0 |
| Final Order |
2019-01-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Complaint |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(l)(1)(i): The employer did not ensure that each powered industrial truck operator is competent to operate a powered industrial truck safely, as demonstrated by the successful completion of the training and evaluation specified in this paragraph (l): (a) Cabinet Shop: On or about November 1, 2018 and at times prior, employees were operating a Hyster Model S50XM forklift to move lumber and finished cabinets. Note: Abatement certification is required for this item. |
|
| Citation ID |
01002B |
| Citaton Type |
Serious |
| Standard Cited |
19100178 L02 II |
| Issuance Date |
2018-12-03 |
| Abatement Due Date |
2018-12-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2019-01-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Complaint |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(l)(2)(ii): The employer did not ensure that each operator had successfully completed the training consisting of a combination of formal instruction (e.g., lecture, discussion, interactive computer learning, video tape, written material), practical training (demonstrations performed by the trainer and practical exercises performed by the trainee), and evaluation of the operator's performance in the workplace. (a) Cabinet Shop: On or about November 1, 2018 and at times prior, employees were operating a Hyster Model S50XM forklift to move lumber and finished cabinets. Note: Abatement certification is required for this item. |
|
| Citation ID |
01002C |
| Citaton Type |
Serious |
| Standard Cited |
19100178 Q07 |
| Issuance Date |
2018-12-03 |
| Abatement Due Date |
2018-12-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2019-01-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Complaint |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: (a) Cabinet Shop: On or about November 1, 2018 and at times prior, employees were operating a Hyster Model S50XM forklift to move lumber and finished cabinets. Note: Abatement certification is required for this item. |
|
| Citation ID |
01003A |
| Citaton Type |
Serious |
| Standard Cited |
19100213 C01 |
| Issuance Date |
2018-12-03 |
| Abatement Due Date |
2018-12-28 |
| Current Penalty |
1663.0 |
| Initial Penalty |
3326.0 |
| Final Order |
2019-01-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.213(c)(1): Circular handfed ripsaw(s) were not guarded by an automatically adjusting hood which completely enclosed that portion of the saw above the table and above the material being cut: (a) Cabinet Shop: On or about October 30, 2018 and at times prior, employees were ripping lumber wtih a 10 inch. Powermatic table saw. Note: Abatement certification is required for this item. |
|
| Citation ID |
01003B |
| Citaton Type |
Serious |
| Standard Cited |
19100213 C02 |
| Issuance Date |
2018-12-03 |
| Abatement Due Date |
2018-12-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2019-01-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.213(c)(2): Hand-fed circular ripsaw(s) were not furnished with a spreader to prevent material from squeezing the saw or being thrown back on the operator: (a) Cabinet Shop: On or about October 30, 2018 and at times prior, employees were ripping lumber wtih a 10 inch. Powermatic table saw. Note: Abatement certification is required for this item. |
|
| Citation ID |
01003C |
| Citaton Type |
Serious |
| Standard Cited |
19100213 C03 |
| Issuance Date |
2018-12-03 |
| Abatement Due Date |
2018-12-28 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2019-01-28 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Complaint |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.213(c)(3): Hand-fed ripsaw(s) did not have non kickback fingers or dogs so located as to oppose the thrust or tendency of the saw to pick up the material or to throw it back toward the operator: (a) Cabinet Shop: On or about October 30, 2018 and at times prior, employees were ripping lumber wtih a 10 inch. Powermatic table saw. Note: Abatement certification is required for this item. |
|
|
