| Inspection Type |
Planned
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2015-03-10
|
| Emphasis |
P: PMETALS, N: PMETALS
|
| Case Closed |
2015-05-27
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100304 G05 |
| Issuance Date |
2015-03-24 |
| Abatement Due Date |
2015-04-17 |
| Current Penalty |
893.0 |
| Initial Penalty |
1785.0 |
| Final Order |
2015-04-10 |
| Nr Instances |
2 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.304(g)(5): The path to ground from circuits, equipment, and enclosures was not permanent, continuous, and effective. a) On or about March 10, 2015 or prior thereto: A yellow extension cord utilized to power a Milwaukee Holeshooter Drill, Serial Number 532B408326903, was missing a ground pin. b) On or about March 10, 2015 or prior thereto: A black cord attached to a Milwaukee Holeshooter Drill, Serial Number 532B408326903, was missing a ground pin. Abatement certification is required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100334 A02 I |
| Issuance Date |
2015-03-24 |
| Abatement Due Date |
2015-04-17 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2015-04-10 |
| Nr Instances |
2 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.334(a)(2)(i): Portable cord and plug-connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket). a) On or about March 10, 2015 or prior thereto: A yellow extension cord utilized to power a Milwaukee Holeshooter Drill, Serial Number 532B408326903, was missing a ground pin and had not been inspected for damage prior to use. b) On or about March 10, 2015 or prior thereto: A black cord attached to a Milwaukee Holeshooter Drill, Serial Number 532B408326903, was missing a ground pin and had not been inspected for damage prior to use. Abatement certification is required for this item. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100242 B |
| Issuance Date |
2015-03-24 |
| Abatement Due Date |
2015-04-17 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2015-04-10 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.242(b): Compressed air was for cleaning purposes and was not reduced to less than 30 p.s.i. a) On or about March 10, 2015 or prior thereto: An air line used for cleaning purposes in the grinding area was rated at 70 p.s.i. Abatement certification is required for this item. |
|
|
