| Inspection Type |
Planned
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2019-01-07
|
| Emphasis |
N: AMPUTATE, P: AMPUTATE
|
| Case Closed |
2019-03-22
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A03 II |
| Issuance Date |
2019-02-07 |
| Abatement Due Date |
2019-03-06 |
| Current Penalty |
1932.0 |
| Initial Penalty |
3864.0 |
| Final Order |
2019-02-22 |
| Nr Instances |
2 |
| Nr Exposed |
4 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(3)(ii): Point(s) of operation of machinery were not guarded to prevent employee(s) from having any part of their body in the danger zone(s) during operating cycle(s): a) Header Assembly Area: On or about January 7, 2019 and at times prior, employees were drilling holes in headers with Shop Fox drill presses. b) Fabrication Area: On or about January 7, 2019 and at times prior, employees were fabricating wheel axels on the Logan Lathe. Note: Abatement certification is required for this item. |
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2014-05-08
|
| Emphasis |
N: CHROME6, N: ISOCYAN8
|
| Case Closed |
2014-10-08
|
Related Activity
| Type |
Complaint |
| Activity Nr |
887558 |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100132 D01 I |
| Issuance Date |
2014-08-27 |
| Abatement Due Date |
2014-09-23 |
| Current Penalty |
1200.0 |
| Initial Penalty |
1200.0 |
| Final Order |
2014-09-23 |
| Nr Instances |
2 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.132(d)(1)(i): The employer did not select and have each affected employee use, the types of personal protective equipment that would protect the affected employee(s) from the hazards identified in the hazard assessment: (a) On the production floor and in the spray booth: On and before May 14, 2014, employees engaged in liner spray operations were not protected from hazards associated with dermal contact with isocyanates through the use of personal protective equipment, such as splash goggles, chemical resistant coveralls, and chemical resistant gloves. (b) On the production floor, in the glue area: On May 14, 2014, employees operating the power foam cutter were not required to wear leather gloves according to the manufacturer's safe operating instructions. . Note: Abatement certification IS required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100134 C01 |
| Issuance Date |
2014-08-27 |
| Abatement Due Date |
2014-09-23 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-23 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Complaint |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: (a) In the production areas: The employer had not established a written respiratory protection program for employees required to use respirators in areas with the potential for over-exposure to hazardous airborne chemicals including isocyanates, volatile organic compounds and hexavalent chromium. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100134 D03 III B 2 |
| Issuance Date |
2014-08-27 |
| Abatement Due Date |
2014-09-23 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-23 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(d)(3)(iii)(B)(2): The employer did not implement a change schedule for respirators not equipped with an End of Service Life Indicator that would ensure cartridges were changed before the end of their service life: (a) Production area: On May 14, 2014, no cartridge change out schedule was implemented for employees wearing tight-fitting respirators. Note: Abatement certification is required for this item. |
|
| Citation ID |
01001D |
| Citaton Type |
Serious |
| Standard Cited |
19100134 E01 |
| Issuance Date |
2014-08-27 |
| Abatement Due Date |
2014-09-23 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-23 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(e)(1): The employer did not provide a medical evaluation to determine the employee's ability to use a respirator, before the employee was fit tested or required to use the respirator in the workplace: (a) Production area: On and before May 14, 2014,employees required to use tight-fitting respirators, were not medically evaluated before using the respirator. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01001E |
| Citaton Type |
Serious |
| Standard Cited |
19100134 F01 |
| Issuance Date |
2014-08-27 |
| Abatement Due Date |
2014-09-23 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-23 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(f)(1): The employer did not ensure that employee(s) required to use a tight-fitting facepiece respirator passed the appropriate qualitative fit test (QLFT) or quantitative fit test (QNFT). (a) Throughout the facility: Fit tests were not completed for employees required to wear tight-fitting respirators. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01001F |
| Citaton Type |
Serious |
| Standard Cited |
19100134 H02 I |
| Issuance Date |
2014-08-27 |
| Abatement Due Date |
2014-09-23 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-23 |
| Nr Instances |
2 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(h)(2)(i): Respirators were not stored to protect them from damage, contamination, dust, sunlight, extreme temperatures, excessive moisture, and damaging chemicals or were not packed or stored to prevent deformation of the facepiece and exhalation valve. (a) Production area: On May 14, 2014 filtering facepiece respirators required by the employer to be worn while applying liner, were stored in the open and were not protected from becoming contaminated. (b) Production area, in the spray booth: On May 14, 2014, filtering supplied air full-face respirators required by the employer to be worn while applying liner, were stored inside the spray booth and were not protected from becoming contaminated with paint. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01001G |
| Citaton Type |
Serious |
| Standard Cited |
19100134 I05 I |
| Issuance Date |
2014-08-27 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-23 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(i)(5)(i): Compressors used to supply breathing air to respirators were not so constructed and situated so as to prevent entry of contaminated air into the air-supply system: (a) Work area, north west of spray booth: On May 8, 2014, the compressor used for the supplied air respirator was located where the air supply could be contaminated with hazardous vapors. Note: Abatement certification is not required for this item. |
|
| Citation ID |
01001H |
| Citaton Type |
Serious |
| Standard Cited |
19100134 K01 VII |
| Issuance Date |
2014-08-27 |
| Abatement Due Date |
2014-09-23 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-23 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(k)(1)(vii): The employer did not ensure that each user could demonstrate knowledge of the general requirements of 29 CFR 1910.134: (a) Throughout facility: Employees required to use respirators while working in dusty conditions or using chemicals with inhalation hazards were not able to demonstrate knowledge of respirators such as: donning/doffing, seal checks, maintenance, storage, and/or filter change out requirements. Note: Abatement certification IS required for this item |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19101200 E01 |
| Issuance Date |
2014-08-27 |
| Abatement Due Date |
2014-09-23 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-23 |
| Nr Instances |
1 |
| Nr Exposed |
9 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met. (a) Throughout facility: The employer failed to produce a complete written hazard communication program. Note: Abatement certification IS required for this item |
|
|
