| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2022-03-18
|
| Emphasis |
L: FALL
|
| Case Closed |
2022-09-26
|
Related Activity
| Type |
Referral |
| Activity Nr |
1877516 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19260453 B02 IV |
| Issuance Date |
2022-04-22 |
| Current Penalty |
2393.0 |
| Initial Penalty |
4786.0 |
| Final Order |
2022-06-02 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.453(b)(2)(iv): Employee(s) working in an aerial lift were not standing firmly on the floor of the basket: a) On March 18, 2022 and at times prior thereto; employees performing structural steel activities from aerial lifts climbed up and worked from the mid railings of the basket. The employees were exposed to an approximate 38 foot fall to the gravel below. Note) Abatement certification is required for this item. |
|
| Citation ID |
01002A |
| Citaton Type |
Repeat |
| Standard Cited |
19260453 B02 V |
| Issuance Date |
2022-04-22 |
| Current Penalty |
6700.0 |
| Initial Penalty |
9571.0 |
| Final Order |
2022-06-02 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.453(b)(2)(v): A body belt was not worn and/or a lanyard was not attached to the boom or basket when working from an aerial lift: a) Pocatello airport hangar: On March 18, 2022 and at times prior thereto; employees performed steel erection activities from an aerial lift without personal fall protection in place. The employees were exposed to an approximate 38 foot fall to the gravel below. Steel Concepts, LLC was previously cited for a violation of this occupational safety and health standard, 20CFR1926.453(b)(2)(v), which was contained in OSHA inspection number 1236984, citation number 1, item number 1a and was affirmed as a final order on July 25, 2017, with respect to a workplace located at 1300 West Overland Road, Meridian, ID 83642. Note) Abatement certification is required for this item. |
|
| Citation ID |
01002B |
| Citaton Type |
Repeat |
| Standard Cited |
19260454 A |
| Issuance Date |
2022-04-22 |
| Abatement Due Date |
2022-06-01 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2022-06-02 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.454(a): The employer did not have each employee who performs work while on a scaffold trained by a person qualified to recognize the hazards associated with the type of scaffold being used: a) On March 18, 2022 employees did not recognize the hazard of not wearing fall protection while working from an aerial lift an estimated 38 feet above the gravel below, or take actions to eliminate or minimize the hazard. Steel Concepts, LLC was previously cited for a violation of this occupational safety and health standard, 20CFR1926.453(b)(2)(v), which was contained in OSHA inspection number 1236984, citation number 1, item number 1b and was affirmed as a final order on July 25, 2017, with respect to a workplace located at 1300 West Overland Road, Meridian, ID 83642. Note) Certification and documentation of corrective action are required for this item. |
|
| Citation ID |
01002C |
| Citaton Type |
Repeat |
| Standard Cited |
19260761 B |
| Issuance Date |
2022-04-22 |
| Abatement Due Date |
2022-06-01 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2022-06-02 |
| Nr Instances |
1 |
| Nr Exposed |
4 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.761(b): The employer does not train each employee exposed to a fall hazard in accordance with the requirements of this section. The employer has not instituted a training program and ensured employee participation in the program: a) On March 18, 2022 employees performing steel erection activities, did not recognize the hazard of working up to an estimated 38 feet high without any fall protection or take corrective actions to minimize the hazard. Steel Concepts, LLC was previously cited for a violation of this occupational safety and health standard 20CFR1926.761(b), which was contained in OSHA inspection number 1236984, citation number 2, item number 2 and was affirmed as a final order on July 25, 2017, with respect to a workplace located at 1300 West Overland Road, Meridian, ID 83642. Note) Certification and documentation of corrective action are required for this item. |
|
|
| Inspection Type |
Referral
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2017-06-02
|
| Case Closed |
2020-07-17
|
Related Activity
| Type |
Referral |
| Activity Nr |
1222425 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19260453 B02 V |
| Issuance Date |
2017-06-21 |
| Abatement Due Date |
2017-06-27 |
| Current Penalty |
2988.0 |
| Initial Penalty |
2988.0 |
| Final Order |
2017-07-25 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.453(b)(2)(v): A personal fall restraint system was not worn and a lanyard was not attached to the boom or basket when working from an aerial lift: a) Jobsite: On June 2, 2017 employees worked out of an aerial lift basket while installing a steel siding system. The employees were not wearing a personal fall restraint system. Note) Certification of corrective action is required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19260454 A |
| Issuance Date |
2017-06-21 |
| Abatement Due Date |
2017-07-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-07-25 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.454(a): The employer did not have each employee who performs work while on a scaffold trained by a person qualified to recognize the hazards associated with the type of scaffold being used: a) Jobsite: On June 2, 2017 employees did not recognize the hazard of not wearing fall protection while working from an aerial lift over 25 feet above the concrete below. The employees did not take action to eliminate or minimize the hazard. Note) Certification of corrective action is required for this item. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19260761 B |
| Issuance Date |
2017-06-21 |
| Abatement Due Date |
2017-07-03 |
| Current Penalty |
239.0 |
| Initial Penalty |
239.0 |
| Final Order |
2017-07-25 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.761(b): The employer does not train each employee exposed to a fall hazard in accordance with the requirements of this section. The employer has not instituted a training program and ensured employee participation in the program: a) The employer does not ensure that employees who are performing steel siding activities, recognize the hazard of working over 24 feet high without any type of fall protection. The employees and the employer are not taking corrective actions to minimize the hazard. This condition was most recently observed on June 2, 2017 at 1300 West Overland Road, Meridian, ID. Steel Concepts was previously cited for a violation of this occupational safety and health standard 29 CFR 1926.761(b), which was contained in OSHA inspection number 493538, citation number 1, item number 2 and was affirmed as a final order on November 24, 2012, with respect to a workplace located at Dell Airstrip, Dell MT 59724. Note) Certification and documentation of corrective action are required for this item. |
|
| Citation ID |
02001 |
| Citaton Type |
Repeat |
| Standard Cited |
19260760 A01 |
| Issuance Date |
2017-06-21 |
| Abatement Due Date |
2017-06-27 |
| Current Penalty |
8366.0 |
| Initial Penalty |
8366.0 |
| Final Order |
2017-07-25 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Referral |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1926.760(a)(1): Except as provided by paragraph (a)(3) of this section, each employee engaged in a steel erection activity who is on a walking/working surface with an unprotected side or edge more than 15 feet (4.6 m) above a lower level is not protected from fall hazards by guardrail systems, safety net systems, personal fall arrest systems, positioning device systems or fall restraint systems: a) The employer does not ensure that employees are using a fall protection system when exposed to serious fall hazards. An employee performing steel siding installation activities worked on a 2 foot wide ledge, 24 and a half feet above the concrete below without a fall protection system in place. This condition was most recently observed on June 2, 2017 at 1300 West Overland Road, Meridian ID. Steel Concepts, LLC was previously cited for a violation of this occupational safety and health standard which was contained in OSHA inspection number 493538, citation number 1, item number 1, and was affirmed as a final order on November 24, 2012, with respect to a workplace located at Dell Airstrip, Dell, MT 59724. Note) Certification AND documentation of corrective actions are required for this item. |
|
| Citation ID |
03001A |
| Citaton Type |
Other |
| Standard Cited |
19030019 C01 |
| Issuance Date |
2017-10-23 |
| Abatement Due Date |
2017-11-17 |
| Current Penalty |
305.0 |
| Initial Penalty |
305.0 |
| Final Order |
2017-11-28 |
| Nr Instances |
3 |
| Nr Exposed |
4 |
| Related Event Code (REC) |
Referral |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1903.19(c)(1): The employer did not certify to OSHA, within 10 calendar days after the abatement date, that the cited violation had been abated: a) The employer did not provide certification of abatement for serious citation 1, items 1a and 1b, for a June 2, 2017 inspection that was issued June 21, 2017. Item 1a had and abatement date of 06/27/2017 and item 1b had a due date of 07/06/2017. b) The employer did not provide certification of abatement for repeat serious citation 2, item 1, for a June 2, 2017 inspection that was issued June 21, 2017. Item 1 had and abatement date of 06/27/2017. c) The employer did not provide certification of abatement for repeat other-than-serious citation 2, item 2, for a June 2, 2017 inspection that was issued June 21, 2017. Item 2 had a due date of 07/03/2017. NOTE: Certification of Corrective action is required for these instances. |
|
| Citation ID |
03001B |
| Citaton Type |
Other |
| Standard Cited |
19030019 D01 |
| Issuance Date |
2017-10-23 |
| Abatement Due Date |
2017-11-17 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-11-28 |
| Nr Instances |
2 |
| Nr Exposed |
4 |
| Related Event Code (REC) |
Referral |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1903.19(d)(1): The employer did not submit to the Agency documents demonstrating that abatement is complete for each willful or repeat violation and for any serious violation for which the Agency indicates in the citation that such abatement documentation is required. a) The employer did not provide documentation as evidence of abatement for repeat serious citation 2, item 1 related to fall protection during steel erection. The item was cited related to a June 2, 2017 inspection that was issued June 21, 2017, with an abatement date of 06/27/2017. b) The employer did not provide documentation as evidence of abatement for repeat other-than-serious citation 2, item 2 requiring fall hazard training for workers engaged in steel erection. The item was cited related to a June 2, 2017 inspection that was issued June 21, 2017. Item 2 had a due date of 07/03/2017. NOTE: In order to comply, the employer must submit supporting evidence, which may include invoices, photos, or other written records. |
|
|
