|
341943694
|
1032500
|
2016-11-30
|
670 COLORADO AVE, IDAHO FALLS, ID, 83402
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2016-11-30
|
| Emphasis |
L: FALL, L: FORKLIFT
|
| Case Closed |
2017-10-16
|
Related Activity
| Type |
Complaint |
| Activity Nr |
1158133 |
| Safety |
Yes |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100023 C01 |
| Issuance Date |
2017-02-06 |
| Abatement Due Date |
2017-02-16 |
| Current Penalty |
0.0 |
| Initial Penalty |
4848.0 |
| Contest Date |
2017-03-07 |
| Final Order |
2017-03-27 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.23(c)(1): Open-sided floors and/or platforms four feet or more above adjacent floor or ground level were not guarded with standard railings (or equivalent) and toeboards: a) Second floor equipment loading area: On or about November 29, 2016 and at times prior thereto; an unlocked, inadequately guarded set of metal doors opened to an immediate floor edge; exposing Printcraft Press employees and cabinet contractors to a 12 foot fall from a height. Employees and contractors are not protected from a fall while moving materials from a forklift when the material handling doors are open. Metal doors are blocked with a wooden gate that is not attached to the doorframe or wall, and does not have a locking mechanism. Note* Abatement certification IS required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Other |
| Standard Cited |
19100037 B05 |
| Issuance Date |
2017-02-06 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2017-03-07 |
| Final Order |
2017-03-27 |
| Nr Instances |
1 |
| Nr Exposed |
8 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.37(b)(5): Each doorway or passage along an exit access that could be mistaken for an exit was not marked "Not an Exit" or similar designation, or identified by a sign indicating its actual use: a) Second floor equipment loading area: On or about November 29, 2016 and at times prior thereto; an unlocked, blocked set of metal doors opened to an immediate floor edge; exposing Printcraft Press employees and cabinet contractors to a 12 foot fall from a height. A sign is not posted above the door or in the immediate area to warn employees of the hazard. Note* Abatement certification IS required for this item. |
|
|
|
331110635
|
1032500
|
2012-01-03
|
3834 S. PROFESSIONAL WAY, IDAHO FALLS, ID, 83402
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Health
|
| Close Conference |
2012-01-04
|
| Emphasis |
N: SSTARG11
|
| Case Closed |
2012-06-19
|
Related Activity
| Type |
Inspection |
| Activity Nr |
111243 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Other |
| Standard Cited |
19101200 E01 |
| Issuance Date |
2012-05-29 |
| Abatement Due Date |
2012-06-19 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2012-06-22 |
| Nr Instances |
1 |
| Nr Exposed |
37 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(e)(1): The employers did not develop, implement, and maintain at each workplace, a written hazard communication program which at least describes how the criteria specified in paragraphs (f), (g), and (h) of this section for labels and other forms of warning, material safety data sheets, and employee information and training will be met. a) On or about January 3, 2012 and at times prior thereto, the employer did not implement a written hazard communication program. A program was assemble but had not been communicated to employees. Note: Abatement certification is required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Other |
| Standard Cited |
19101200 F05 |
| Issuance Date |
2012-05-29 |
| Abatement Due Date |
2012-06-19 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2012-06-22 |
| Nr Exposed |
4 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(f)(5): The employer did not ensure that each container of hazardous chemicals in the workplace was labeled, tagged or marked a) Lithographic press room: On or about January 3, 2012 and at times prior thereto, a container with pre-wash solvent was not labeled to identify the contents or describe the hazards of the contents. Note: Abatement certification is required for this item. |
|
|
|
331112433
|
1032500
|
2012-01-03
|
3834 S. PROFESSIONAL WAY, IDAHO FALLS, ID, 83402
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2012-01-04
|
| Emphasis |
N: SSTARG11
|
| Case Closed |
2013-02-04
|
Related Activity
| Type |
Inspection |
| Activity Nr |
111063 |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C01 |
| Issuance Date |
2012-04-27 |
| Abatement Due Date |
2012-05-18 |
| Current Penalty |
1750.0 |
| Initial Penalty |
3500.0 |
| Contest Date |
2012-05-22 |
| Final Order |
2012-09-13 |
| Nr Exposed |
30 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(1): The employer did not establish a program consisting of energy control procedures, employee training and periodic inspections to ensure that before any employee performs any servicing or maintenance on a machine or equipment where the unexpected energizing, startup or release of stored energy could occur and cause injury, the machine or equipment was isolated from the energy source and rendered inoperative: a) Facility: On January 3, 2012 and times prior thereto the employer had not developed and implemented an energy control program for the employees who perform activities which include, but are not limited to, scheduled and unscheduled maintenance on machines and equipment that include, but are not limited to the MAN ROLAND print press, the HEIDELBERG Windmill and Die Cutter, and WOLTENBURG Cutter, nor had they provided awareness training to those employees who may be affected by these activities in their work areas. Note) Abatement certification IS required for this item. |
|
| Citation ID |
01002A |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A01 |
| Issuance Date |
2012-04-27 |
| Abatement Due Date |
2012-05-18 |
| Current Penalty |
1750.0 |
| Initial Penalty |
3500.0 |
| Contest Date |
2012-05-22 |
| Final Order |
2012-09-13 |
| Nr Exposed |
15 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks: a) Hand Bindery room: On January 3, 2012 and times prior thereto a guard was not in place at the rear area of the shrink wrap machine where a pulley assembly was located and the point of operation was exposed. b) Bindery area: On January 3, 2012 and times prior thereto the vintage HEIDELBERG Windmill and Diecutter machines both had exposed flywheels, low to the floor, located on the side of each machine, with storage shelves or a walkway close by. Note) Abatement certification IS required for this item. |
|
| Citation ID |
01002B |
| Citaton Type |
Serious |
| Standard Cited |
19100219 H01 |
| Issuance Date |
2012-04-27 |
| Abatement Due Date |
2012-05-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-05-22 |
| Final Order |
2012-11-27 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(h)(1): All projecting keys, setscrews, and other projections in revolving parts were not removed or made flush or guarded by metal cover. a) Litho Press room: On January 3, 2012 and times prior thereto an adjustment key was left in place on a rotating shaft while the JET press was in use. Note) Abatement certification IS required for this item. |
|
| Citation ID |
01002C |
| Citaton Type |
Serious |
| Standard Cited |
19100219 I02 |
| Issuance Date |
2012-04-27 |
| Abatement Due Date |
2012-05-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-05-22 |
| Final Order |
2012-11-27 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(i)(2): Shaft couplings were not constructed as to present no hazard from bolts, nuts, setscrews, or revolving surfaces. Bolts, nuts, and setscrews will, however, be permitted where they are covered with safety sleeves or where they are used parallel with the shafting and are countersunk or else do not extend beyond the flange of the coupling: a) Bindery area: On January 3, 2012 and times prior thereto employees were exposed to an unguarded shaft coupling on the Muller Martini stitcher binder machine. Note) Abatement certification IS required for this item. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100037 A03 |
| Issuance Date |
2012-04-27 |
| Abatement Due Date |
2012-05-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-05-22 |
| Final Order |
2012-11-27 |
| Nr Exposed |
8 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.37(a)(3): Exit routes were not free and unobstructed. Materials or equipment were placed, either permanently or temporarily, within the exit route: a) West side of storage area: On January 3, 2012 and times prior thereto the exit route was partially blocked by a storage rack. Note) Abatement certification IS required for this item. |
|
| Citation ID |
02002 |
| Citaton Type |
Other |
| Standard Cited |
19100157 E03 |
| Issuance Date |
2012-04-27 |
| Abatement Due Date |
2012-05-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-05-22 |
| Final Order |
2012-11-27 |
| Nr Exposed |
38 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: a) Facility: On January 3, 2012 and times prior thereto portable fire extinguishers observed in work areas including but not limited to, the pre-print room, the litho press room, and the hand bindery room had not had annual maintenance checks since 2006. Note) Abatement certification IS required for this item. |
|
| Citation ID |
02003 |
| Citaton Type |
Other |
| Standard Cited |
19100157 G01 |
| Issuance Date |
2012-04-27 |
| Abatement Due Date |
2012-05-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-05-22 |
| Final Order |
2012-11-27 |
| Nr Exposed |
27 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.157(g)(1): Where the employer has provided portable fire extinguishers for employee use in the workplace, the employer has not provided an educational program to familiarize employees with the general principles of fire extinguisher use and the hazards involved with incipient stage fire fighting: a) Facility: On January 3, 2012 and times prior thereto employees had not been trained on the hazards and safe use of fire extinguishers, or the employers policy on their use. Note) Abatement certification IS required for this item. |
|
| Citation ID |
02004 |
| Citaton Type |
Other |
| Standard Cited |
19100178 L06 |
| Issuance Date |
2012-04-27 |
| Abatement Due Date |
2012-05-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-05-22 |
| Final Order |
2012-11-27 |
| Nr Exposed |
27 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(l)(6): The employer did not certify that each operator had been trained and evaluated as required by this paragraph (l). The certification shall include the name of the operator, the date of the training, the date of the evaluation, and the identity of the person(s) performing the training or evaluation: a) Shipping and receiving: On January 3, 2012 and times prior thereto an employee operating the Crown Hyster order picker had not been evaluated in the work environment and certified by the employer to ensure safe operation and handling of equipment and materials. Note) Abatement certification IS required for this item. |
|
| Citation ID |
02005 |
| Citaton Type |
Other |
| Standard Cited |
19100303 B02 |
| Issuance Date |
2012-04-27 |
| Abatement Due Date |
2012-05-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-05-22 |
| Final Order |
2012-11-27 |
| Nr Exposed |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(b)(2): Listed or labeled equipment was not installed and used in accordance with any instructions included in the listing or labeling: a) Hand Bindery area: On January 3, 2012 and times prior thereto a 15 ampere relocatable power tap (power strip) was used as permanent wiring for four machines, each requiring at least 15 ampere for operation. b) Hand Bindery area: On January 3, 2012 and times prior thereto a relocatable power tap (power strip) with four machines plugged into it, was used in conjunction with an extension cord, a two way junction box with pre-punched knock outs, and a flexible cord, essentially creating a "daisy chain" and potentially overloading the branch circuit. Note) Abatement certification IS required for this item. |
|
| Citation ID |
02006 |
| Citaton Type |
Other |
| Standard Cited |
19100305 G01 IV A |
| Issuance Date |
2012-04-27 |
| Abatement Due Date |
2012-05-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-05-22 |
| Final Order |
2012-11-27 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: a) Bindery/Cutter area: On January 3, 2012 and times prior thereto a flexible cable was used as permanent wiring for the WOLENBURG Cutter machine and the Ferro 1500 battery charger. Note) Abatement certification IS required for this item. |
|
| Citation ID |
02007 |
| Citaton Type |
Other |
| Standard Cited |
19100305 G02 III |
| Issuance Date |
2012-04-27 |
| Abatement Due Date |
2012-05-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Contest Date |
2012-05-22 |
| Final Order |
2012-11-27 |
| Nr Exposed |
9 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws: a) Hand Bindery area: On January 3, 2012 and times prior thereto a flexible cord used for permanent wiring was damaged at the plug due to lack of strain relief. Note) Abatement certification IS required for this item. |
|
|
|
218330249
|
1032500
|
1981-02-09
|
319 C STREET, Idaho Falls, ID, 83401
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Health
|
| Close Conference |
1981-02-12
|
| Case Closed |
1981-04-06
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Other |
| Standard Cited |
19100309 A 040004 |
| Issuance Date |
1981-02-24 |
| Abatement Due Date |
1981-03-11 |
| Nr Instances |
5 |
|
| Citation ID |
01002 |
| Citaton Type |
Other |
| Standard Cited |
19100309 A 040004 |
| Issuance Date |
1981-02-24 |
| Abatement Due Date |
1981-03-11 |
| Nr Instances |
3 |
|
|
|
218287191
|
1032500
|
1974-04-02
|
319 C STREET, Idaho Falls, ID, 83401
|
|
| Inspection Type |
FollowUp
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
1974-04-02
|
| Case Closed |
1984-03-10
|
|
|
218296994
|
1032500
|
1974-02-12
|
319 C STREET, Idaho Falls, ID, 83401
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
1974-02-12
|
| Case Closed |
1984-03-10
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Other |
| Standard Cited |
19100219 E01 I |
| Issuance Date |
1974-02-15 |
| Abatement Due Date |
1974-03-14 |
| Nr Instances |
2 |
|
| Citation ID |
01002 |
| Citaton Type |
Other |
| Standard Cited |
19100023 D01 II |
| Issuance Date |
1974-02-15 |
| Abatement Due Date |
1974-03-14 |
| Nr Instances |
1 |
|
|
