|
344570874
|
1032500
|
2020-01-13
|
21986 MIDDLETON RD, CALDWELL, ID, 83605
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2020-01-14
|
| Emphasis |
N: SSTARG16, P: SSTARG16
|
| Case Closed |
2020-07-10
|
Related Activity
| Type |
Inspection |
| Activity Nr |
1456458 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Other |
| Standard Cited |
19100037 B01 |
| Issuance Date |
2020-04-08 |
| Abatement Due Date |
2020-05-04 |
| Current Penalty |
2733.0 |
| Initial Penalty |
3904.0 |
| Final Order |
2020-05-04 |
| Nr Instances |
1 |
| Nr Exposed |
25 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.37(b)(1): Each exit route was not adequately lighted so that an employee with normal vision can see along the exit route. (a) Plant 7: Tank Shop: On or about January 13, 2020 and at times prior to, the exit route for employees working prior to sunrise or after dark does not have adequate lighting. Note: Abatement certification is required for this item. |
|
| Citation ID |
01002A |
| Citaton Type |
Other |
| Standard Cited |
19100303 G01 |
| Issuance Date |
2020-04-08 |
| Abatement Due Date |
2020-05-04 |
| Current Penalty |
2733.0 |
| Initial Penalty |
3904.0 |
| Final Order |
2020-05-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(g)(1): Sufficient access and working space was not provided and maintained about all electric equipment (operating at 600 volts, nominal, or less to ground) to permit ready and safe operation and maintenance of such equipment: (a) Plant 7: Tank Shop-compressor area: On or about January 13, 2020 and at times prior to the area around the access to an electrical panel was approximately 19.5 inches wide. Note: Abatement certification is required. |
|
| Citation ID |
01002B |
| Citaton Type |
Other |
| Standard Cited |
19100303 H02 I |
| Issuance Date |
2020-04-08 |
| Abatement Due Date |
2020-05-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2020-05-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(h)(2)(i): Electrical installations in a vault, room, or closet or in an area surrounded by a wall, screen, or fence, were not controlled by lock and key or other approved means, and were considered to be accessible to all employees: (a) Plant 7: Container Shop: On or about January 13, 2020 and at times prior to the caged area that enclosed high voltage, electrical boxes and equipment was closed with a metal bar and was not locked to prohibit unauthorized access. Note: Abatement certification is required for this item. |
|
| Citation ID |
01002C |
| Citaton Type |
Other |
| Standard Cited |
19100305 G01 IV A |
| Issuance Date |
2020-04-08 |
| Abatement Due Date |
2020-05-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2020-05-04 |
| Nr Instances |
2 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(g)(1)(iv)(A): Flexible cords and/or cables were used as a substitute for the fixed wiring of a structure: (a) Plant 7: Container Shop-inside wall of compressor area: On or about January 13, 2020 and at times prior to a heat wrap coil had been plugged in to an extension cord to maintain heat on a compressor pipe. (b) Plant 7: Tank Shop-compressor area: On or about January 13, 2020 and at times prior to a personal-type space heater had been plugged in to an extension cord to maintain heat on a compressor pipe. Note: Abatement certification is required for these items. |
|
| Citation ID |
01002D |
| Citaton Type |
Other |
| Standard Cited |
19100305 B02 I |
| Issuance Date |
2020-04-08 |
| Abatement Due Date |
2020-05-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2020-05-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(b)(2)(i): Each outlet box in completed installations did not have a cover, faceplate, or fixture canopy: (a) Plant 7: Container Shop: On or about January 13, 2020 and at times prior to the face plate on a post with welder outlets was bent and potentially exposing live wires underneath. Note: Abatement certification is required for this item. |
|
|
|
344564588
|
1032500
|
2020-01-13
|
11299 BASS LN., CALDWELL, ID, 83605
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2020-01-14
|
| Emphasis |
L: CRANE, L: FORKLIFT
|
| Case Closed |
2020-07-10
|
Related Activity
| Type |
Complaint |
| Activity Nr |
1533176 |
| Safety |
Yes |
|
| Type |
Inspection |
| Activity Nr |
1457087 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Other |
| Standard Cited |
19100303 G01 |
| Issuance Date |
2020-04-08 |
| Abatement Due Date |
2020-05-04 |
| Current Penalty |
2733.0 |
| Initial Penalty |
3904.0 |
| Final Order |
2020-05-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(g)(1) Sufficient access and working space were not provided and maintained about all electric equipment to permit ready and safe operation and maintenance of such equipment. a) Location: SE corner entrance of Plant 3 Warehouse Entrance. On or about January 13, 2020 and at times prior employees were exposed to physical and electrical hazards due to the Rule Steel Tank's failure to ensure that sufficient access and working space was provided in front of electric panel to permit safe operation and maintenance of such equipment. Note) Abatement Certification IS Required |
|
| Citation ID |
01001B |
| Citaton Type |
Other |
| Standard Cited |
19100303 G01 VI B |
| Issuance Date |
2020-04-08 |
| Abatement Due Date |
2020-05-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2020-05-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(g)(1)(vi)(B): A three foot minimum clearance per Table S-1 (Minimum Depth of Clear Working Space at Electric Equipment, 600 V or Less) was not maintained for working spaces about service equipment, switchboards, panel boards, or motor control centers. a) Location: Plant #3 Warehouse Camber Bending Machine and supplying electrical disconnect power source. On or about January 13, 2020, and at times prior employees worked and conducted maintenance to the Camber Bending Machine and nearby power source electrical disconnect box at a clearance working distance of approximately 27 inches. Note) Abatement Certification IS Required. |
|
|
|
341803534
|
1032500
|
2016-09-28
|
11299 BASS LN., CALDWELL, ID, 83605
|
|
| Inspection Type |
Planned
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2016-09-28
|
| Emphasis |
N: ISOCYAN8, P: ISOCYAN8
|
| Case Closed |
2016-10-01
|
|
|
341053353
|
1032500
|
2015-11-13
|
11299 BASS LANE, CALDWELL, ID, 83605
|
|
| Inspection Type |
Complaint
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2015-11-13
|
| Case Closed |
2016-02-04
|
Related Activity
| Type |
Complaint |
| Activity Nr |
1037632 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Other |
| Standard Cited |
19040039 A02 |
| Issuance Date |
2016-01-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
3825.0 |
| Final Order |
2016-02-04 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Complaint |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1904.39(a)(2): The employer did not report an in-patient hospitalization, amputation, or loss of an eye as a result of a work-related incident to OSHA within twenty-four (24) hours: (a) In plant #2: On November 13, 2015, and at times prior thereto the employer failed to report a work-related amputation which occurred on October 12, 2015. Note: Abatement certification NOT required for this item, item corrected during inspection. |
|
|
|
340587237
|
1032500
|
2015-04-27
|
11333 BASS LN., CALDWELL, ID, 83605
|
|
| Inspection Type |
FollowUp
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2015-04-27
|
| Case Closed |
2015-04-27
|
Related Activity
| Type |
Inspection |
| Activity Nr |
975230 |
| Safety |
Yes |
|
|
|
339752305
|
1032500
|
2014-04-30
|
11333 BASS LN., CALDWELL, ID, 83605
|
|
| Inspection Type |
Fat/Cat
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2014-04-30
|
| Emphasis |
L: FORKLIFT
|
| Case Closed |
2014-07-11
|
Related Activity
| Type |
Accident |
| Activity Nr |
887903 |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100178 M05 III |
| Issuance Date |
2014-06-10 |
| Abatement Due Date |
2014-07-01 |
| Current Penalty |
4500.0 |
| Initial Penalty |
4500.0 |
| Final Order |
2014-07-03 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Related Event Code (REC) |
Accident |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(m)(5)(iii): When the operator of an industrial truck was dismounted and within 25 ft. of the truck still in the operators view, the load engaging means (forks) were not fully lowered, controls neutralized, and the brakes set to prevent movement: a) South side of plant 3: The forks of a Caterpillar telehandler were not lower to the ground before the operator left the cab of the telehandler. The forks were supporting an unsecured 5000 lb., 50 foot long beam. Note) Abatement certification AND documentation ARE required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100178 O01 |
| Issuance Date |
2014-06-10 |
| Abatement Due Date |
2014-07-01 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-07-03 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Related Event Code (REC) |
Accident |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(o)(1): Stable or safely arranged loads were not handled: a) South side of plant 3: An unsecured, 50 foot beam was centered on the elevated forks of a Caterpillar powered industrial truck (telehandler). The act of attempting to flip the load 180 degrees while on the elevated forks, caused it to be un-stable. Note) Abatement documentation AND certification ARE required for this item. |
|
|
|
339021602
|
1032500
|
2013-04-23
|
21986 MIDDLETON ROAD, CALDWELL, ID, 83605
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2013-04-23
|
| Emphasis |
N: AMPUTATE, N: SSTARG12, P: SSTARG12
|
| Case Closed |
2013-09-05
|
Related Activity
| Type |
Inspection |
| Activity Nr |
902280 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A01 |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
1900.0 |
| Initial Penalty |
3825.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
51 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. a) Shop 2, East Wing: On or about April 23, 2013 and at times prior thereto, the employer did not provide a barrier or other guarding at the back side of the point of operation on a Pirhana press brake. Note: Abatement certification is required for this item. |
|
| Citation ID |
01002A |
| Citaton Type |
Other |
| Standard Cited |
19100303 B02 |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
0.0 |
| Initial Penalty |
2295.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(b)(2): Listed or labeled equipment was not installed and used in accordance with any instructions included in the listing or labeling. a) Shop 2, East Wing: On or about April 23, 2013 and at times prior thereto, a welder was plugged into a job-made extension cord with an outlet box with pre-punched knockouts as the end fitting. Note: Abatement certification is required for this item. |
|
| Citation ID |
01002B |
| Citaton Type |
Other |
| Standard Cited |
19100303 F02 |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(f)(2): Each service, feeder, and branch circuit, at its disconnecting means or overcurrent device, was not legibly marked to indicate its purpose. a) Plant 2, Old Paint Booth: On or about April 23, 2013 and at times prior thereto, a breaker panel was not labeled to indicate the purpose of each breaker. Note: Abatement certification is required for this item. |
|
| Citation ID |
01002C |
| Citaton Type |
Other |
| Standard Cited |
19100304 A02 |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.304(a)(2): A grounded conductor was attached to a terminal or lead so as to reverse designated polarity. a) Plant 2, Old Paint Booth: On or about April 23, 2013 and at times prior thereto, the employees used an outlet that was wired with reversed polarity. Note: Abatement certification is required for this item. |
|
| Citation ID |
01002D |
| Citaton Type |
Serious |
| Standard Cited |
19100305 B01 II |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(b)(1)(ii): Unused openings in cabinets, boxes, and fittings were not effectively closed. Shop 2, Old Paint Booth: On or about April 23, 2013 and at times prior thereto, an energized outlet had a unused open conduit connection. Note: Abatement certification is required for this item. |
|
|
|
339031221
|
1032500
|
2013-04-22
|
21986 MIDDLETON ROAD, CALDWELL, ID, 83605
|
|
| Inspection Type |
Planned
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2013-04-23
|
| Emphasis |
N: CHROME6, P: CHROME6
|
| Case Closed |
2013-09-05
|
Related Activity
| Type |
Inspection |
| Activity Nr |
902176 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Other |
| Standard Cited |
19100134 C02 I |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(c)(2)(i): Respirator users were not provided with the information contained in Appendix D to 29 CFR 1910.134 when the employer determined that any voluntary respirator use was permissible: (a) In the container preparation area in production facility #2: On April 22, 2013 at times prior thereto, the employer failed to effectively provide information contained in Appendix D to 29 CFR 1910.134 to Spanish speaking employees voluntarily using full-face dust masks respirators. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01002 |
| Citaton Type |
Other |
| Standard Cited |
19101026 D02 I |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-20 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1026(d)(2)(i): The employer using the scheduled monitoring option did not perform initial monitoring to determine the 8-hour time-weighted average exposure to chromium (VI) for each employee on the basis of a sufficient number of personal breathing zone air samples to accurately characterize full shift exposure on each shift, for each job classification, in each work area. (a) In the tank production facility, adjacent to Middleton Rd: On May 1, 2013 and at times prior thereto, the employer did not conduct sufficient monitoring to accurately characterize employee exposure to chromium (VI) for employees engaged in welding operation on and in the interior of steel tanks, exposing employees to chromium (VI) levels as high as 0.0045 mg/m3 which is above the action limit of 0.0025 mg/m3 . Note: Abatement certification IS required for this item. |
|
|
|
339022808
|
1032500
|
2013-04-22
|
11333 BASS LN., CALDWELL, ID, 83605
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2013-04-23
|
| Emphasis |
N: AMPUTATE, N: SSTARG12, P: SSTARG12
|
| Case Closed |
2013-09-05
|
Related Activity
| Type |
Inspection |
| Activity Nr |
902176 |
| Safety |
Yes |
|
| Type |
Inspection |
| Activity Nr |
902160 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Other |
| Standard Cited |
19100147 C04 I |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
3825.0 |
| Initial Penalty |
3825.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
34 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(4)(i): Procedures were not developed, documented or utilized for the control of potentially hazardous energy when employees were engaged in the activities covered by this section. a) Plant 3, Camber Machine: On or about April 22, 2013 and at times prior thereto, there was no specific energy control procedure developed or used. Note: Abatement certification is required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Other |
| Standard Cited |
19100147 C06 I |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
35 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedure at least annually to ensure that the procedure and the requirements of this standard were being followed. a) On or about April 22, 2013 and at times prior thereto, the employer did not review the procedure and program for isolating energy for equipment throughout the facility. Note: Abatement certification is required for this item. |
|
| Citation ID |
01001C |
| Citaton Type |
Other |
| Standard Cited |
19100147 C07 I |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(7)(i): The employer did not provide training to ensure that the purpose and function of the energy control program were understood by employees and that the knowledge and skills required for the safe application, usage, and removal of the energy controls were acquired by employees. a) On or about April 22, 2013 and at times prior thereto, employees that had limited communication in English, or were functionally Spanish-speaking only, were not provided with training or procedures in Spanish to ensure that the program and procedures were understood. Note: Abatement certification is required for this item. |
|
|
|
339021768
|
1032500
|
2013-04-22
|
11299 BASS LN., CALDWELL, ID, 83605
|
|
| Inspection Type |
Planned
|
| Scope |
Complete
|
| Safety/Health |
Safety
|
| Close Conference |
2013-04-22
|
| Emphasis |
N: SSTARG12, P: SSTARG12
|
| Case Closed |
2013-09-05
|
Related Activity
| Type |
Inspection |
| Activity Nr |
902280 |
| Safety |
Yes |
|
| Type |
Inspection |
| Activity Nr |
903122 |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A01 |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
1900.0 |
| Initial Penalty |
3825.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(1): One or more methods of machine guarding was not provided to protect the operator and other employees in the machine area from hazards such as those created by point of operation, ingoing nip points, rotating parts, flying chips and sparks. a) Shop 1: On or about April 22, 2013 and at times prior thereto, the employer did not provide a barrier or other guarding at the back side of the point of operation on a Standard Industrial Corp. press brake. Note: Abatement certification is required for this item. |
|
| Citation ID |
01002 |
| Citaton Type |
Other |
| Standard Cited |
19100212 B |
| Issuance Date |
2013-07-29 |
| Current Penalty |
3060.0 |
| Initial Penalty |
3060.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
60 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(b): Machines designed for a fixed location were not securely anchored to prevent walking or moving. a) Shop 1: On or about April 22, 2013 and at times prior thereto, the United Model 910 drill press, serial number 76165, was not secured to the floor to prevent moving. The drill press could be rocked back with minimal hand pressure. Note: Abatement certification is not required for this item. |
|
| Citation ID |
01003 |
| Citaton Type |
Other |
| Standard Cited |
19100219 C04 I |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
3060.0 |
| Initial Penalty |
3060.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
60 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.219(c)(4)(i): Projecting shaft ends did not present a smooth edge and end and projected more than one-half the diameter of the shaft. a) Shop 1: On or about April 22, 2013 and at times prior thereto, employees used a vertical milling machine as a drill press, which had an unguarded rotating shaft protruding from the top of the machine. Note: Abatement certification is required for this item. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100133 A01 |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.133(a)(1): The employer did not ensure that each affected employee used appropriate eye or face protection when exposed to eye or face hazards from flying particles, molten metal, liquid chemicals, acids or caustic liquids, chemical gases or vapors, or potentially injurious light radiation. a) Shop 1, large drill press behind the Standard press brake: On or about April 22, 2013 and at times prior thereto, an employee was working on a large drill press and around other metal working machinery without safety glasses. Note: Abatement certification is required for this item. |
|
| Citation ID |
02002A |
| Citaton Type |
Other |
| Standard Cited |
19100305 G02 III |
| Issuance Date |
2013-07-29 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
60 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.305(g)(2)(iii): Flexible cords and cables were not connected to devices and fittings so that strain relief was provided that would prevent pull from being directly transmitted to joints or terminal screws. a) Shop 1: On or about April 22, 2013 and at times prior thereto, the employees used a United drill press that had it's power cord strain relief removed from the knock-out. Abatement certification is not required for this item. |
|
| Citation ID |
02002B |
| Citaton Type |
Other |
| Standard Cited |
19100334 A02 I |
| Issuance Date |
2013-07-29 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
60 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.334(a)(2)(i): Portable cord and plug connected equipment and flexible cord sets (extension cords) were not visually inspected before use on any shift for external defects (such as loose parts, deformed and missing pins, or damage to outer jacket or insulation) and for evidence of possible internal damage (such as pinched or crushed outer jacket). a) Shop 1: On or about April 22, 2013 and at times prior thereto, employees used a United drill press that had damage to the outer insulation on its power cord. Note: Abatement certification is not required for this item. |
|
| Citation ID |
02003 |
| Citaton Type |
Other |
| Standard Cited |
19100242 B |
| Issuance Date |
2013-07-29 |
| Abatement Due Date |
2013-08-22 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-08-20 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.242(b): Compressed air was used for cleaning purposes where not reduced to less than 30 p.s.i. a) Shop 1: On or about April 22, 2013 and at times prior thereto, an employee was using an air nozzle to clean parts with 120 psi shop air. The safety tip was removed from the nozzle. |
|
|
|
305514754
|
1032500
|
2002-12-09
|
21986 MIDDLETON ROAD, CALDWELL, ID, 83605
|
|
| Inspection Type |
Planned |
| Scope |
Partial |
| Safety/Health |
Safety |
| Close Conference |
2002-12-09 |
| Emphasis |
S: AMPUTATIONS |
| Case Closed |
2003-03-04 |
Violation Items
| Citation ID |
01001 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A01 |
| Issuance Date |
2003-01-23 |
| Abatement Due Date |
2003-01-30 |
| Current Penalty |
312.5 |
| Initial Penalty |
625.0 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
03 |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A03 II |
| Issuance Date |
2003-01-23 |
| Abatement Due Date |
2003-01-30 |
| Current Penalty |
312.5 |
| Initial Penalty |
625.0 |
| Nr Instances |
1 |
| Nr Exposed |
2 |
| Gravity |
03 |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100252 B02 III |
| Issuance Date |
2003-01-23 |
| Abatement Due Date |
2003-01-30 |
| Current Penalty |
125.0 |
| Initial Penalty |
250.0 |
| Nr Instances |
1 |
| Nr Exposed |
10 |
| Gravity |
03 |
|
|
|
218349249
|
1032500
|
1983-07-28
|
MIDDLETON RD & BOISE RIVER, Middleton, ID, 83644
|
|
| Inspection Type |
Planned |
| Scope |
Records |
| Safety/Health |
Safety |
| Close Conference |
1983-07-28 |
| Case Closed |
1983-08-01 |
|
