|
339858128
|
1032500
|
2014-07-18
|
LATITUDE 44.767966 LONGITUDE -115.996723 PADDY FLATS TIMBER SALE, DONNELLY, ID, 83615
|
|
| Inspection Type |
Prog Related
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2014-07-18
|
| Emphasis |
L: LOGGING
|
| Case Closed |
2014-10-31
|
Related Activity
| Type |
Inspection |
| Activity Nr |
985467 |
| Safety |
Yes |
|
| Type |
Inspection |
| Activity Nr |
985820 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100095 C01 |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-10-09 |
| Current Penalty |
893.0 |
| Initial Penalty |
1785.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(c)(1): The employer did not administer a continuing, effective hearing conservation program, as described in paragraphs (c) through (o) of this section, whenever employee noise exposures equal or exceed an 8-hour time-weighted average sound level (TWA) of 85 decibels measured on the A scale (slow response) or, equivalently, a dose of fifty percent. a) While engaged in chain saw operations during logging activity, an employee was exposed to a noise dose of 145.2% over 312 minutes, or an equivalent 8 hour Time Weighted Average of 92.6 dBA. b) While engaged in chain saw operations during logging activity, an employee was exposed to a noise dose of 147.4% over 258 minutes, or an equivalent 8 hour Time Weighted Average of 92.8 dBA. c) While engaged in chain saw operations during logging activity, an employee was exposed to a noise dose of 113.0% over 275 minutes, or an equivalent 8 hour Time Weighted Average of 90.8 dBA. Abatement certification is required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100095 D01 |
| Issuance Date |
2014-08-22 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(d)(1): When information indicated that any employee's exposure may of equaled or exceeded an 8-hour time-weighted average of 85 decibels, the employer did not develop and implement a monitoring program. a) While engaged in chain saw operations during logging activity, an employee was exposed to a noise dose of 145.2% over 312 minutes, or an equivalent 8 hour Time Weighted Average of 92.6 dBA. b) While engaged in chain saw operations during logging activity, an employee was exposed to a noise dose of 147.4% over 258 minutes, or an equivalent 8 hour Time Weighted Average of 92.8 dBA. c) While engaged in chain saw operations during logging activity, an employee was exposed to a noise dose of 113.0% over 275 minutes, or an equivalent 8 hour Time Weighted Average of 90.8 dBA. The aforementioned employees had not been part on an employer noise monitoring program. Abatement was completed for this item. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100095 G01 |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-10-09 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(g)(1): The employer did not establish and maintain an audiometric testing program as provided in this paragraph by making audiometric testing available to all employees whose exposures equal or exceed an 8-hour time-weighted average of 85 decibels. a) While engaged in chain saw operations during logging activity, an employee was exposed to a noise dose of 145.2% over 312 minutes, or an equivalent 8 hour Time Weighted Average of 92.6 dBA. b) While engaged in chain saw operations during logging activity, an employee was exposed to a noise dose of 147.4% over 258 minutes, or an equivalent 8 hour Time Weighted Average of 92.8 dBA. c) While engaged in chain saw operations during logging activity, an employee was exposed to a noise dose of 113.0% over 275 minutes, or an equivalent 8 hour Time Weighted Average of 90.8 dBA. The aforementioned employees had part of an audiometric testing program to monitor for signs of hearing loss. Abatement certification is required for this item. |
|
| Citation ID |
01001D |
| Citaton Type |
Serious |
| Standard Cited |
19100095 K01 |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-10-09 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
3 |
| Nr Exposed |
3 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.95(k)(1): The employer did not train each employee who is exposed to noise at or above an 8-hour time weighted average of 85 decibels in accordance with the requirements of this section. a) While engaged in chain saw operations during logging activity, an employee was exposed to a noise dose of 145.2% over 312 minutes, or an equivalent 8 hour Time Weighted Average of 92.6 dBA. b) While engaged in chain saw operations during logging activity, an employee was exposed to a noise dose of 147.4% over 258 minutes, or an equivalent 8 hour Time Weighted Average of 92.8 dBA. c) While engaged in chain saw operations during logging activity, an employee was exposed to a noise dose of 113.0% over 275 minutes, or an equivalent 8 hour Time Weighted Average of 90.8 dBA. The aforementioned employees had not been trained by the employer in: 1) The effects of noise on hearing; 2) The purpose of hearing protectors, the advantages, disadvantages, and attenuation of various types, and instructions on selection, fitting, use, and care; and 3) The purpose of audiometric testing, and an explanation of the test procedures. Abatement certification is required for this item. |
|
|
|
339858201
|
1032500
|
2014-07-18
|
LAT 44.767966 LONG -115.996723 PADDY FLAT TS, DONNELLY, ID, 83615
|
|
| Inspection Type |
Planned
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2014-07-18
|
| Emphasis |
L: LOGGING, P: LOGGING
|
| Case Closed |
2014-09-12
|
Related Activity
| Type |
Inspection |
| Activity Nr |
985467 |
| Safety |
Yes |
|
| Type |
Inspection |
| Activity Nr |
985812 |
| Health |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Other |
| Standard Cited |
19100266 D02 I |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
4 |
| Nr Exposed |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.266(d)(2)(i): The employer did not provide first-aid kits at each work site where trees were being cut, at each active landing, and/or on each employee transport vehicle: a) Logging First aid kits were not complete and available at the processing operation; b) Logging first aid kits were not complete and available at the landing; c) Logging first aid kits were not complete and available at each harvester (Timbco and the Idaho Jammer): d) Logging first aid kits were not complete and available at each transport vehicle. Note: Abatement certification is required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Other |
| Standard Cited |
19100266 D02 II |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.266(d)(2)(ii): Each first aid kit did not contain the items listed in Appendix A at all times: a) Items missing from the first aid kits include: Splint, blanket, scissors, wound cleaner. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01002 |
| Citaton Type |
Other |
| Standard Cited |
19100266 D04 |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.266(d)(4): The employer did not provide and maintain portable fire extinguishers on each machine and vehicle in accordance with the requirements of subpart L of part 1910: a) Each portable fire extinguisher on each piece of equipment did not have a tag or other marking indicating the last annual inspection or the most recent monthly inspection or when service intervals were due. Note: Abatement certification IS required for this item. Note #2: fire extinguishers were provided but did not comply with 29 CFR 1910.157(e)(2) No monthly inspections and/or 29 CFR 1910.157(E)(3) no annual inspection of record. |
|
|
|
339854671
|
1032500
|
2014-07-16
|
406 W. MUSSER ST., EMMETT, ID, 83617
|
|
| Inspection Type |
Planned
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2014-07-16
|
| Emphasis |
L: LOGGING, P: LOGGING
|
| Case Closed |
2014-10-31
|
Related Activity
| Type |
Inspection |
| Activity Nr |
985812 |
| Health |
Yes |
|
| Type |
Inspection |
| Activity Nr |
985820 |
| Safety |
Yes |
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100178 F02 |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-18 |
| Current Penalty |
1050.0 |
| Initial Penalty |
2100.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(f)(2): The storage and handling of liquefied petroleum gas fuel was not in accordance with NFPA No. 58-1969, Storage and Handling of Liquefied Petroleum Gases. Section 6.21.3.4(B): Fuel containers shall be mounted to prevent jarring loose and slipping or rotating, and the fastening shall be designed and constructed to withstand, without permanent visible deformation, static loading in any direction equal to four times the weight of the container filled with fuel: a) The extra Powered industrial Liquid Propane Gas tank was stored inside the shop sitting on its end and unsecured. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100178 L06 |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(l)(6): The employer did not certify that each operator has been trained and evaluated as required by this paragraph (l): a) The employer did not train, evaluate or certify that each operator was capable of safely operating a forklift. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100178 Q07 |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.178(q)(7): Industrial trucks were not examined before being placed in service: a) Employees did not inspect powered industrial trucks before each use. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100242 B |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-04 |
| Current Penalty |
1050.0 |
| Initial Penalty |
2100.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.242(b): Compressed air used for cleaning purposes was not reduced to less than 30 p.s.i.: a) Compressed air was used for cleaning parts and radiators without being reduced to 30 p.s.i. or less at the tip of the nozzle. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01003A |
| Citaton Type |
Serious |
| Standard Cited |
19100303 B07 I |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-18 |
| Current Penalty |
1400.0 |
| Initial Penalty |
2800.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(b)(7)(i): Unused openings in boxes, raceways, auxiliary gutters, cabinets, equipment cases, or housings were not effectively closed to afford protection substantially equivalent to the wall of the equipment: a) The electrical distribution/breaker box in the southeast corner was missing covers allowing for accidental contact with energized parts. Note: Abatement certification IS required for this item. |
|
| Citation ID |
01003B |
| Citaton Type |
Serious |
| Standard Cited |
19100303 G01 II |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.303(g)(1)(ii): The required working space about electric equipment rated 600 volts, nominal, or less to ground, was used for storage: a) A truck engine was stored in front of the energized electrical distribution/breaker box impeding access. Note: Abatement certification IS required for this item. |
|
| Citation ID |
02001 |
| Citaton Type |
Other |
| Standard Cited |
19100157 E03 |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.157(e)(3): Portable fire extinguishers were not subjected to an annual maintenance check: a) Fire extinguishers were not inspected or had an annual maintenance checks since 1999. Note: Abatement certification IS required for this item. |
|
| Citation ID |
02002 |
| Citaton Type |
Other |
| Standard Cited |
19100215 B09 |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.215(b)(9): The distance between the abrasive wheel periphery(s) and the adjustable tongue or the end of the safety guard peripheral member at the top exceeded one-fourth inch: a) The gap between the tongue guard and the wheel on both wheels of the bench grinder was 0.5 inches. Note: Abatement certification IS required for this item. |
|
| Citation ID |
02003A |
| Citaton Type |
Other |
| Standard Cited |
19100244 A01 II |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.244(a)(1)(ii): Rated load(s) of portable jack(s) were not legibly and permanently marked in a prominent location on the jack(s) by casting, stamping, or other suitable means: a) Hydraulic jacks had no visible markings as to their capacity, they were worn off. Note: Abatement certification IS required for this item. |
|
| Citation ID |
02003B |
| Citaton Type |
Other |
| Standard Cited |
19100244 A02 VI A |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.244(a)(2)(vi)(a): Each jack used constantly or intermittently at a single locality was not thoroughly inspected at least once every six months: a) Employer did not conduct inspections of the jacks in use in the shop. Note: Abatement certification IS required for this item. |
|
| Citation ID |
02004 |
| Citaton Type |
Other |
| Standard Cited |
19100253 B02 II |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-04 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.253(b)(2)(ii): Assigned storage spaces for cylinders was not located away from elevators, stairs, or gangways where cylinders could not be knocked over or damaged by passing or falling objects, or subject to tampering by unauthorized persons: a) Two cylinders of acetylene gas were free standing (not secured) in the middle of the shop where they could be damaged by trucks pulling in and out. Note: Abatement certification IS required for this item. |
|
| Citation ID |
02005 |
| Citaton Type |
Other |
| Standard Cited |
19101200 E01 I |
| Issuance Date |
2014-08-22 |
| Abatement Due Date |
2014-09-18 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2014-09-12 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(e)(1)(i): The employer did not compile a list of the hazardous chemicals known to be present using a product identifier that was referenced on the appropriate safety data sheet: a) When requested the employer could not provide a list of chemicals, such as ZEP parts washer cleaner, known to be in use in the shop. Note; Abatement certification IS required for this item. |
|
|
