| Inspection Type |
Planned
|
| Scope |
Partial
|
| Safety/Health |
Health
|
| Close Conference |
2013-02-28
|
| Emphasis |
L: STONE, P: STONE, N: SILICA
|
| Case Closed |
2013-05-31
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100134 C01 |
| Issuance Date |
2013-05-07 |
| Abatement Due Date |
2013-06-03 |
| Current Penalty |
1600.0 |
| Initial Penalty |
2800.0 |
| Final Order |
2013-05-22 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(c)(1): A written respiratory protection program that included the provisions in 29 CFR 1910.134(c)(1)(i) - (ix) with worksite specific procedures was not established and implemented for required respirator use: a) Fabrication Shop: On or about February 26, 2013 and at times prior thereto, where an employee was over-exposed to respirable crystalline silica, the employer did not have a written respiratory protection program implemented at the workplace. Choice for use of a house-hold use only dust mask or an N-95 filtering face-piece was considered optional for the employee. NOTE: Abatement certification is required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100134 D01 III |
| Issuance Date |
2013-05-07 |
| Abatement Due Date |
2013-06-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-05-22 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(d)(1)(iii): The employer did not identify and evaluate the respiratory hazard(s) in the workplace; including a reasonable estimate of employee exposures to respiratory hazards and identification of the contaminant's chemical state and physical form: a) Fabrication shop, on or about February 22, 2013 and at times prior thereto, employee exposure to respirable crystalline silica had not been evaluated or monitored by the employer. Note: Abatement certification and documentation required for this item. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100134 K |
| Issuance Date |
2013-05-07 |
| Abatement Due Date |
2013-06-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-05-22 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.134(k): The employer did not provide comprehensive, understandable training which did not occur annually and/or more often if necessary: a) Fabrication Shop, on or about February 26, 2013 and at times prior thereto, an employee needing to wear a respirator had not been effectively trained as to respiratory hazards of crystalline silica or to the limitations of "house-hold" use only dust mask and/or N-95 filtering face-pieces. Note: Abatement certification is required for this item. |
|
| Citation ID |
01001D |
| Citaton Type |
Serious |
| Standard Cited |
19101200 E01 |
| Issuance Date |
2013-05-07 |
| Abatement Due Date |
2013-06-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-05-22 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(e)(1): The employer did not develop, implement, and/or maintain at the workplace a written hazard communication program which describes how the criteria specified in 29 CFR 1910.1200(f), (g), and (h) will be met: a) Throughout the facility, on or about February 26, 2013 and at times prior thereto, where employees were exposed to respirable crystalline silica and other chemicals, there was no written hazard communication program in place. Note: Abatement certification is required for this item. |
|
| Citation ID |
01001E |
| Citaton Type |
Serious |
| Standard Cited |
19101200 G01 |
| Issuance Date |
2013-05-07 |
| Abatement Due Date |
2013-06-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-05-22 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(g)(1): The employer did not have a material safety data sheet for each hazardous chemical in use: (a) Throughout the worksite: On or about February 26, 2013 and at times prior thereto, the employer did not have a safety data sheet for the crystalline silica, which is a component of natural granite, that the employee was exposed to. Note: Abatement certification is required for this item. |
|
| Citation ID |
01001F |
| Citaton Type |
Serious |
| Standard Cited |
19101200 H01 |
| Issuance Date |
2013-05-07 |
| Abatement Due Date |
2013-06-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-05-22 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1200(h)(1): Employees were not provided effective information and training on hazardous chemicals in their work area at the time of their initial assignment and whenever a new hazard that the employees had not been previously trained about was introduced into their work area: a) Throughout the facility, on or about February 26, 2013 and at times prior thereto, the employer had not provided effective training on the hazards of respirable crystalline silica. Note: Abatement certification is required for this item. |
|
| Citation ID |
01001G |
| Citaton Type |
Serious |
| Standard Cited |
19101000 C |
| Issuance Date |
2013-05-07 |
| Abatement Due Date |
2013-06-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
2800.0 |
| Final Order |
2013-05-22 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1000(c): An employee(s) was exposed to Crystalline Silica in excess of the 8-hour time weighted average limits of crystalline silica, listed in Table Z-3, in excess of the time-weighted average permissible exposure limit: a) Fabrication shop: On or about February 26, 2013, and at times prior thereto, the eight-hour time weighted average (TWA) exposure to crystalline silica quartz for an employee dry grinding granite stone, was determined to be 1.093 milligrams per cubic meter of air (mg/m3) which was over the calculated Permissible Exposure Limit (PEL) of 0.500 mg/m3 based on the samples silica content of 18%. Note: Abatement certification AND documentation are required for this item. |
|
| Citation ID |
01001H |
| Citaton Type |
Serious |
| Standard Cited |
19101000 E |
| Issuance Date |
2013-05-07 |
| Abatement Due Date |
2013-06-03 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2013-05-22 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
10 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.1000(e): Feasible administrative or engineering controls were not determined and implemented to achieve compliance with the limits prescribed in 29 CFR 1910.1000(a) through (d): (a) Fabrication shop: On or about February 26, 2013 and at times prior thereto the ventilation system in the fabrication shop did not adequately capture the silica dust produced resulting in employee overexposures. (Reference Citation 1 Item 4a). Note: Abatement certification AND documentation required for this item. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100176 B |
| Issuance Date |
2013-05-07 |
| Abatement Due Date |
2013-05-07 |
| Current Penalty |
1000.0 |
| Initial Penalty |
2000.0 |
| Final Order |
2013-05-22 |
| Nr Instances |
3 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.176(b): Storage of material created a hazard: a) Storage yard: On or about February 26, 2013, and at times prior thereto, employees were exposed to crushing hazards from improper granite slab storage. Granite slabs were stored un-secured in the storage yard. Note: Abatement certification is NOT required for this item. |
|
| Citation ID |
01003 |
| Citaton Type |
Serious |
| Standard Cited |
19100243 C01 |
| Issuance Date |
2013-05-07 |
| Abatement Due Date |
2013-05-17 |
| Current Penalty |
600.0 |
| Initial Penalty |
1200.0 |
| Final Order |
2013-05-22 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
1 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.243(c)(1): Abrasive wheel(s) were used on portable grinder(s) which were not provided with safety guard(s) meeting the requirements specified in 29 CFR 1910.243(c)(1) through (c)(4) a) Fabrication shop: On or about February 26, 2013, and at times prior thereto, an employee was using a portable Makita SJS grinders with a cup wheel that had not been guarded. Note: Abatement certification is required for this item. |
|
|
