| Inspection Type |
Planned
|
| Scope |
Partial
|
| Safety/Health |
Safety
|
| Close Conference |
2017-01-20
|
| Emphasis |
N: AMPUTATE, P: AMPUTATE
|
| Case Closed |
2017-05-23
|
Violation Items
| Citation ID |
01001A |
| Citaton Type |
Serious |
| Standard Cited |
19100147 A02 II B |
| Issuance Date |
2017-04-13 |
| Abatement Due Date |
2017-07-13 |
| Current Penalty |
0.0 |
| Initial Penalty |
4310.0 |
| Final Order |
2017-05-22 |
| Nr Instances |
2 |
| Nr Exposed |
2 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(a)(2)(ii)(B): An employee was required to place a part of his or her body into an area on a machine or piece of equipment where work was actually performed upon the material being processed (point of operation) and where an associated danger zone existed during a machine operating cycle. a) Plant 1: On or about January 19, 2017 and at times prior thereto; a pressman was making adjustments to the Didde Glaser, Inc., web press Model 176-702, SN 302-80 while using a hand tool and placing his hands into a danger zone associated with a the machine operating cycle. Note* Abatement certification IS required for this item. |
|
| Citation ID |
01001B |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C06 I |
| Issuance Date |
2017-04-13 |
| Abatement Due Date |
2017-07-13 |
| Current Penalty |
2155.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-05-22 |
| Nr Instances |
1 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(6)(i): The employer did not conduct a periodic inspection of the energy control procedures at least annually to ensure that the procedure and the requirement of this standard were being followed: a) Production Areas: On or about January 19, 2016 and at times prior thereto; the employer did not conduct an annual review of the LOTO procedures for their printing presses to include their inventory of web presses, collators, binders and cutters. Note* Abatement certification IS required for this item. |
|
| Citation ID |
01001C |
| Citaton Type |
Serious |
| Standard Cited |
19100147 C07 I |
| Issuance Date |
2017-04-13 |
| Abatement Due Date |
2017-07-13 |
| Current Penalty |
0.0 |
| Initial Penalty |
0.0 |
| Final Order |
2017-05-22 |
| Nr Instances |
2 |
| Nr Exposed |
3 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.147(c)(7)(i): The employer did not provide adequate training to ensure that employees acquired the knowledge and skills required for the safe application, usage and removal of energy control devices: a) On or about January 19, 2017 and at times prior thereto; LOTO procedures were not employed while the Didde press operator was performing daily operator level maintenance to include oiling of parts and rollers and minor adjustments while machine guards were not in place and hands/fingers were in close proximity to nip points, and machine was operating. Note* Abatement certification IS required for this item. |
|
| Citation ID |
01002 |
| Citaton Type |
Serious |
| Standard Cited |
19100212 A03 II |
| Issuance Date |
2017-04-13 |
| Abatement Due Date |
2017-05-31 |
| Current Penalty |
2155.0 |
| Initial Penalty |
4310.0 |
| Final Order |
2017-05-22 |
| Nr Instances |
1 |
| Nr Exposed |
1 |
| Gravity |
5 |
| FTA Current Penalty |
0.0 |
| Citation text line |
29 CFR 1910.212(a)(3)(ii): The point of operation of machine whose operation exposed an employee to injury, was not guarded: a) Shop 2: On or about January 19, 2017 and at times prior thereto; A Delta 12' Drill Press, SN that was modified to use as a paint mixer did not have a guard affixed to the point of operation that would prevent an operators fingers or hand from being caught in the drill attachment. note * Abatement certification IS required for this item. |
|
|
